NP0115AG03LC-JB_10 Datasheet, PDF (6/6 Pages) Nihon Kaiheiki Industry Co. Ltd. – Subminiature Smooth Actuation Pushbuttons

Subminiature Smooth Actuation Pushbuttons
Series NP01
AT3024
12mm Square Cap
Material:
Polycarbonate Resin
CAP TYPES & COLORS (CONTINUED)
Solid Color Cap for Nonilluminated
(12.0) Sq
.472
(10.2)
.402
A _Black
B _White
C _Red
H _Gray
(12.0) Sq
.472
(10.2)
.402
(12.5)
.492
TYPICAL SWITCH DIMENSIONS
(2.1)
.083
(7.0)
.276
(0.3) Typ
.012
(3.3)
.130
LC1 1 L3 L4
L1 L2 2 LC2
(2.0) Typ
.079
(0.5) Typ
.020
Illuminated • Straight PC
D
(2.0) Typ
.079
L4 L3 1 LC1
(7.0)
LC2 2 L2 L1 ^.276
(1.0) Dia Typ
CL
.039
NP0115HG03LF-JF
PACKAGING
No
Code
Partitioned Tray
Any quantity. No code is required. Switches may be packaged with or without caps installed.
S _{Stick-Tube Packaging}
50 pieces per stick
Switches must be ordered in 50-piece
(15.3)
.602
increments when stick-tube packaging
is selected. This packaging is for the
switch body only. Caps will be packaged
(11.85)
separately.
.467
(470.0)
18.504
LEGEND ORIENTATION
Top View Bottom View
OPEN
LC1 1 L3 L4
L1 L2 2 LC2
LC2
Orient cap with legend as shown here, and “LC2” at lower right of switch body.
Orders for switches with legends will be assembled as illustrated.
PRECAUTIONS FOR HANDLING & STORAGE
1. NP01 Pushbuttons are electrostatically sensitive. To prevent damage to LED, devices must
be properly isolated from static electricity.
2. Once the cap is installed onto the switch body, it cannot be removed.
3. When assembling cap, align projection on switch body to slot on inside of cap. (Refer to
illustration at right.)
4. * Legends may be printed on the lens with laser etch, screen print or pad print methods.
Epoxy based ink is recommended.
5. Do not use excessive force during installation on PC board or for cap installation.
* NKK Switches can provide custom legends for caps. Contact factory for more information.
ATTENTION
E L E C T R O S TAT I C
SENSITIVE DEVICES
Slot
Projection
w w w.nkk.com
D77