JB15LPC-B Datasheet, PDF (6/6 Pages) Nihon Kaiheiki Industry Co. Ltd. – Low Profile Process Sealed Tactiles

Low Profile Process Sealed Tactiles Series JB
LEGENDS
LM
Easily create and submit your own legends using our new on-line Legend Maker.
Visit www.nkkswitches.com
For other legend support options, customers may either contact the factory and request the JB Legend Packet,
or utilize the general information and basic specifications presented below.
Suggested Printable Area for Cap, Lens, or Button
Laser Etch, Screen Print or Pad Print
Recommended Methods:
Laser Etch or Pad Print
Epoxy based ink
PWR
UP
is recommended.
Epoxy based ink
ON
is recommended.
(10.0) Sq
.394
(10.48) Sq
.412
(12.0) Sq
.472
(0.76) Typ
.030
(10.48) Sq
.412
(12.0) Sq
.472
(0.76) Typ
.030
Shaded areas are printable areas.
(6.94)
.273
(8.46)
.333
(0.76) Typ
.030
Suggested Printable Area for Film Insert
Recommended Methods: Laser Etch on clear lens, Screen Print, or Pad Print on lens; Screen Print on film insert.
Epoxy based ink is recommended.
Lens
ON
Film Insert
Translucent White or
Colored Diffuser
Frame
(20.0) R
.787
(8.38) Typ
.330
(9.9)
.390
Shaded area is printable area.
Film Insert: Clear Polyester 7 mil maximum thickness
Additional Methods
Additional methods for legends are engraving the lens and laser printing on film inserts.
Maximum depth for engraving is .012” (0.3mm) on the cap lens.
Enamel paint is recommended to fill the engraved area.
NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone] • www.nkkswitches.com 03-07