FR01FR10PB-S Datasheet, PDF (4/7 Pages) Nihon Kaiheiki Industry Co. Ltd. – 10mm DIP Rotaries

K _{Plastic Shaft}
Adjusted by hand
or with flat tipped
screwdriver
10mm DIP Rotaries Series FR01
ACTUATION
S _Dial
A _{Metal Shaft}
Adjusted by hand
or with flat tipped
screwdriver
Knob options
illustrated below
with color choices
Actuators are fully rotational and operate either clockwise or counterclockwise.
Colors for Actuators K and S: Orange for real coded devices; Yellow for complement coded devices
Mounting hardware is available if needed for models with Actuator A:
Hexagon Nut AT513M, Locking Ring AT515M, and Lockwasher AT509; all are shown in the Accessories and Hardware section.
OPTIONAL KNOBS FOR METAL SHAFT
AT433
Plain Black
AT4103 Small
Color Tipped
AT4104 Large
Color Tipped
Material:
Polyacetal
(19.0) Dia
.748
(11.0) Dia
.433
Polyester Base:
Black
(16.0) Dia
.630
(9.5) Dia
.374
Polyester Base:
Black
(18.0) Dia
.709
(11.0) Dia
.433
Color:
Black
(13.0)
.512
(0.5)
.020
Polyamide Tip
(14.3)
(9.5)
.374
Colors:
.563
Polyamide Tip
(9.5)
.374
Colors:
(15.8)
.622
(9.5)
.374
A, B, C, E, F, G, H
(0.5)
.020
A, B, C, E, F, G, H
(0.5)
.020
Knob Orientation: When installed with shaft flat rotated 180° from bushing flat as shown in “Typical Switch Dimensions,”
white line on cap points to Actuator Position 0 noted in truth tables below.
Color Codes:
A Black
B White
C Red
E Yellow
F Green
G Blue
H Gray
TRUTH TABLES (CIRCUITS & POSITIONS)
Actuator Position
Terminal No. (Output)
x = ON
1
R _{Real Coded}
2
Model Numbers:
FR01FR, FR01KR,
4
FR01SR, FR01AR
8
10 _Decimal
16 _Hexadecimal
01234567890123456789AB CDE F
1
C _{Complement Coded}
Model Numbers:
2
FR01FC, FR01KC
4
FR01SC, FR01AC
8
Terminal numbers are actually on the switch.
Above sequence shown for clockwise rotation.
NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone] • www.nkkswitches.com
05-08