OLINUXINO-MAXI Datasheet, PDF (28/50 Pages) Nihon Kaiheiki Industry Co. Ltd. – OLinuXino-MAXI Open-source single-board Linux computer

OLIMEX© 2012
OLinuXino User's Manual
6.2 SD/MMC slot
The microSD card slot is a standard 8pin connector.
We have tested a number of microSD cards on the OLinuXino boards and all of them worked fine
regardless manufacturer or capacity. However, keep in mind that some of the lower quality
microSD cards might draw too much current from the slot which might cause power-state problems.
If you suspect the microSD card is causing problems please try using another one of better quality
for better results.
microSD card connector
Pin # Signal Name
Processor Pin #
1 SSP1_DATA2
86
2 SSP1_DATA3
87
3 SSP1_CMD
83
4 SD_VCC
-
5 SSP1_SCK
90
6 GND
30, 35, 98, 105, 112, 118
7 SSP1_DATA0
84
8 SSP1_DATA1
85
Notice that the pad numeration is written at the bottom of OLinuXino-MAXI under the microSD
Page 28 of 50