YB01KW01 Datasheet, PDF (2/6 Pages) Nihon Kaiheiki Industry Co. Ltd. – Complement to YB Pushbuttons

01 _Square
Complement to YB Pushbuttons YB Indicators
SHAPES & MOUNTING TYPES
Bushing Mounting
Snap-in Mounting
02 _Round
03 _Rectangular
04 _Square
05 _Round
06 _Rectangular
Bezel-barrier is an integral part of the indicator body.
PANEL SEAL
No Code Without Panel Seal
W With Panel Seal
Bushing
Mounting
Snap-in
Mounting
Bushing
Mounting
only
Supplied with
mounting nut.
Supplied with mounting
nut and o-ring AT089.
INCANDESCENT LAMP & SOLID CAP
The electrical specifications shown are determined at a basic temperature of 25°C.
If the source voltage exceeds the rated voltage, a ballast resistor is required.
The resistor value can be calculated by using the formula in the Supplement section.
AT611
T-1 Bi-pin
Voltage
Current
MSCP
Endurance
Ambient Temperature Range
V
I
Hours
Solid Cap for Incandescent Lamp
Lens/Insert
Colors Available:
AT3001
Square
BB
White/
White
CB
Red/
White
EB
Yellow/
White
(15.0) Sq
.591
(12.2)
.480
(4.0)
.157
FB
Green/
White
GB
Blue/
White
AT3002
Round
Materials: Polycarbonate (Lens & Insert)
Thermoplastic Elastomer (Seal/Filter)
Finish: Glossy
AT3003
Rectangular
(15.0)
.591
(15.0) Dia
.591
(12.2)
.480
(4.0)
.157
05
12
5V AC
12V AC
115mA
60mA
.150
.150
7,000 average
–25°C ~ +50°C
(21.0)
Translucent Colored Lens
.827
(12.2)
.480
(4.0)
.157
Translucent White Insert
Translucent White Seal/Filter
Incandescent Lamp AT611
NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone] • www.nkkswitches.com 03-07