English
Language : 

KP0115ACAKG036CF-2SJB Datasheet, PDF (1/10 Pages) Nihon Kaiheiki Industry Co. Ltd. – Miniature Audio/Video Pushbuttons
Series KP
Miniature Audio/Video Pushbuttons
General Specifications
Electrical Capacity (Resistive Load)
Low Level: 100mA maximum @ 12V DC
Other Ratings
Contact Resistance:
Insulation Resistance:
D Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Travel:
200 milliohms maximum
100 megohms minimum @ 250V DC
1,000V AC minimum between contacts for 1 minute minimum
1,500V AC minimum between contacts & case for 1 minute minimum
5,000,000 operations minimum;
1,000,000 operations minimum for custom Rectangular Switch/Cap Assembly (at center of cap)
5,000,000 operations minimum
KP01: 1.9N maximum for Tactile & Nontactile models (at center of cap)
KP02: 1.6N maximum for Tactile, Nontactile & Tactile/Audible models (at center of cap)
KP01: Pretravel .122” (3.1mm); Overtravel .055” (1.4mm); Total Travel .177” (4.5mm)
KP02: Pretravel .091” (2.3mm); Overtravel .047” (1.2mm); Total Travel .138” (3.5mm)
Materials & Finishes
Plunger/Upper Housing:
Lower Housing:
Movable Contact:
Stationary Contacts:
Switch Terminals:
Polyacetal
Glass fiber reinforced PBT (UL94V-0)
Stainless steel with gold plating
Gold over copper alloy
Brass with tin plating
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
–25°C through +50°C (–13°F through +122°F)
90-95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
51G (500m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Cap Installation Force : 50.0N maximum downward force on actuator
PCB Processing
Soldering:
Cleaning:
Wave Soldering. See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards: UL94V-0 lower housing
The KP Series pushbuttons have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
D36
w w w.nkk.com