JL15SKSBCP2 Datasheet, PDF (1/4 Pages) Nihon Kaiheiki Industry Co. Ltd. – Illuminated Ultra-Thin Tactiles

Series JL
Illuminated Ultra-Thin Tactiles
General Specifications
Electrical Capacity (Resistive Load)
Low/Logic Level: 50mA @ 24V DC
Other Ratings
Contact Resistance: 50 milliohms maximum
Insulation Resistance: 500 megohms minimum @ 250V DC
Dielectric Strength: 250V AC minimum for 1 minute minimum
Mechanical Life: 1,000,000 operations minimum
Electrical Life: 1,000,000 operations minimum
Nominal Operating Force: 3.0N
Total Travel: .030” (0.75mm)
Materials & Finishes
Actuator:
Case:
Base:
Movable Contact:
Stationary Contacts:
Switch Terminals:
Lamp Terminals:
Polycarbonate
Glass fiber reinforced polyamide
Glass fiber reinforced polybutylene terephthalate (PBT)
Phosphor bronze with silver plating
Brass with silver plating
Brass with silver plating
Brass with tin plating
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
J
Shock:
–25°C through +50°C (–13°F through +122°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s²) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
PCB Processing
Soldering:

Cleaning:
Wave Soldering: See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications

The JL Series tactiles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current circuit.
When used as intended, the results do not produce hazardous energy.
J46
w w w.nkk.com