HB215SKG03CE-JB Datasheet, PDF (1/5 Pages) Nihon Kaiheiki Industry Co. Ltd. – Quiet Actuation Illuminated Pushbutton

Series HB2 Quiet Actuation Illuminated Pushbutton
General Specifications
Electrical Capacity (Resistive Load)
Logic Level (code G): 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Travel:
80 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
100,000 operations minimum
100,000 operations minimum
1.8 Newtons
1.3mm (.051") pretravel; 0.5mm (.020") overtravel; 1.8mm (.071") total travel
Materials & Finishes
Housing:
Base:
Movable Contact:
Contact Terminals:
Lamp Terminals:
Glass fiber reinforced polyamide
Glass fiber reinforced polyamide
Phosphor bronze with gold plating
Phosphor bronze with gold plating
Steel with silver plating
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
-25°C through +50°C (-13°F through +122°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s²) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Cap Installation Force:
Soldering Time & Temperature:
Process Seal:
15N (3.37 lbf) maximum downward force on cap
3 seconds @ 350°C or 5 seconds @ 270°C
Not available
Standards & Certifications
UL Recognition
or CSA Certification:
The HB2 pushbuttons have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce
hazardous energy.
L-2
www.nkkswitches.com NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone]