English
Language : 

SC245 Datasheet, PDF (4/4 Pages) Digitron Semiconductors – THYRISTOR
NOTES:
1. Characteristic values apply lor eithei polarity of main terminal 2
referenced to main terminal 1.
2. Main terminal 1 is the reference t e r m i n a l for main t e r m i n a l 2 and
gate terminal.
3. With Vrj equal to maximum allowable off-state voltage.
4. The junction-to-ambient value is under worst case conditions; i.e.,
with No. 22 copper wire used for electrical contact to the terminals
and natural convection moling.
5. lunction-lo-case steady-state thermal resistance (Rgjc) is tested in
accordance with F l A - N I - M A Standard RS-.W. Section 3.3.2, which
states: "Thermal charactt'ristivs arc to be measured with the device
uprrariiiR in onlv one Jin'clion." The values listed are the limiting
value for either direction.
6. Apparent thermal resistance applies for a 50 or 60 Hz full sine wave
of current. It can be calculated with the following formula:
Apparent thermal resistance =—Jl.max) ...
P'HAV)
where: Tj(iliaX) a maximum junction temperature
T("
" case temperature
P'I'(AV) = average on-state power
SIX BASIC PACKAGES
• Other packages available upon request.
PRESS-FIT
ISOLATED STUD
With Press on
MT2 Terminal
7. Values for these test conditions are:
Device
Package
Commutating
di/dt
TC(°C>
Non-isolated Stud/Press-1'it
c/"-)4n/^r?4i Isolated Stud
Non-isolated TO-3 Flange
3 2 A/msec
Isolated TO-3 Flange
Non-Isolated Stud/Press-Fit
^f^d ^/^f?dfi Isolated Stud
Non-Isolated TO-3 Flange
Isolated TO-3 Flange
Non-isolated Stud/Press-f-'it
Q*"^ ^r\/<sr"} *; i Isolated Slud
Non-Isolated TO-3 Flange
Isolated TO-3 Flange
Non-Isolated Stud/Press Fit
Qr^Afi/cr"^ i Isolated Stud
1 \ A lmtf>f
Non-Isolated TO-3 Flange
Isolated TO-3 Flange
Non-Isolated Stud/Pres»-Fit
Isolated Stud
Cr'TftC/CpTfti
Non-Isolated TO-3 Flange
21 5 A/msec
Isolated TO-3 Flange
82
80
80
79
80
78
78
76
86
83
83
4o~
80
75
75
71
81
74
74
68
ISOLATED
TO-3 FLANGE
NON-ISOLATED
fi
STUD
r:.'ycj>/
TYPE 1
TYPE 2
ISOLATED STUD
With Solder Ring
MT2 Tflrminal
TYPE 3
TYPE 4
NON-ISOLATED
TO-3 FLANGE
TYPE 5