English
Language : 

W005G Datasheet, PDF (1/1 Pages) Pan Jit International Inc. – 1.5 AMPERE SILICON MINIATURE SINGLE- PHASE BRIDGES(VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes)
<^£.tni-(2ondu.ctoi
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
, One..
TELEPHONE: (973) 376-2922
(212)227-6005
FAX: (973) 376-8960
W005GTHRU W10G
MINIATURE GLASS PASSIVATED SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE -50 to 1000 Volts CURRENT-1.5 Amperes
* Glass passivated chip junctions
* Plaslic material used carries Underwriters
Laboratory tlammability recognition 94V-0
* High case dielectric strength
* Typical IR less than 0,1 u A
» High overload surge capability
» ideal lor printed circuit board
* High temperature soldering guaranteed:
265' C /10 seconds / .375", (9.5mm) lead
length / 5lbs,, (2,3 kg) tension
Dimensions In inches
and
(millimeters)
MECHANICAL DATA
Case: Molded plastic
Terminals: Leads solderable per
MIL-STD-202, Method 208
Weight: 0.04 ounce, 1.1 grams
Mounting Position: Any
Weight; 0.04 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25'C amtnent temperature unless otherwise specified.
60 HZ, resistive or inductive load
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Vollag*
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at
375",(9.5mm) lead length at TA - 2S'C
Peak Forward Surge Current Single hall sine-wave
superimposed on rated load (JEDEC Method)
Rat'ng lor fusing (l<B.3ms)
Maximum Instantaneous Forward Voltage Drop
per element at 1.0 Amperes
Maximum DC Reverse Current at Rated
TA w 25'C
DC Blocking Voltage per Bridge Element TA • 125'C
Typical Junction Capacitance per element
Typical Thermal Resistance
Operating Temperature Range
Storage Temperature Range
SYMBOLS 0050 era 020 <wo oeo ota too UNITS
VRRM 50 100 200 400 600 800 1000 Volts
VRMS 35 70 140 280 420 560 700 Volts
VDC 50 100 200 400 600 800 1000 Volts
I(AV)
1,5
Amps
!rsM
1-1
Vr
IR
Cj
RBJA
TA I
TSTQ
50.0
10.0
1.0
5.0
500
14.0
36.0
-5510+1 SO
-55 to -f 125
-55 to >1 50
Amps
A^
Volts
HA
pf
'C/W
'C
•c
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors