UZ706 Datasheet, PDF (1/2 Pages) Microsemi Corporation – POWER ZENERS

-donductoi Lpioducti, IJnc.
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
TELEPHONE: [phone]
[phone]
FAX: [phone]
POWER ZENERS
3 Watt
UZ706 SERIES
UZ806 SERIES
UZ706HR2 SERIES
UZ806HR2 SERIES
FEATURES
• 10 Times Greater Surge Rating than Conventional
1 Watt Types
• Small Physical Size
DESCRIPTION
Fused-in-glass metallurgical^ bonded
3 watt zener diudes.
ABSOLUTE MAXIMUM RATINGS
Zener Voltage, V,
Continuous Current
Surge Current (8.3ms)
Surge Power
Power
Storage and Operating Temperature
MECHANICAL SPECIFICATIONS
BAND INDICATES
CATHODE END
6.8 to 400V
See Table
See Table
See Graph
See Lead Temperature Derating Curve
—65'C to -t-175'C
UZ706HR2 SERIES UZ706 SERIES
UZ8O6HR2 SERIES UZ806 SERIES
BODY A
UZ Prefix is identified bv o Blue or Red Cathode Band
Power Dissipation
vs. Lead Temperature Derating Curve
Surge Power
vs. Surge Duration
Typical Zener Impedance
vs. Zener Current
25 50 75 !00 125 150 175
LEAD TEMPERATURE |'C)
100ns Ins 10»s lOIVs 1ms
SURGE DURATION (S)
1
10
100
ZENER CURRENT (mAl
OPTIONAL HIGH RELIABILITY (HR2) SCREENING
The following tests art performed on 100% of the devices specified UZ706 through UZ14OHR2.
SCREEN
MIL-STD-750
METHOD
CONDITIONS
1. High Temperature
1032
24 Hours ® TA = 175"C
2. Temperature Cycling
1051
C, 20 Cycles, -65 to +175°C. No dwell required
@ 25°C > 10 rnin. at extremes
3. Hermetic Seal 9 Gross Leak
1071
E, ZYGLO
4. Interim Electrical Parameters
GO/NO GO
Vz + IR @ 25°C
5. Rower Burn-in
1038
B, 96 Hours, TA - 25°C, lz adjusted so that
150-C < Tj < 175»C
6. Final Electrical Parameters
GO/NO GO
V2 + IR @ 25°C
PDA = 10% (Final Electrical*)
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to.be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors