TIL102 Datasheet, PDF (1/2 Pages) New Jersey Semi-Conductor Products, Inc. – OPTOCOUPLERS

(yJ.ZII.EUj ^{^zml-donauctoi}
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
i, Line.
TELEPHONE: [phone]
[phone]
FAX: [phone]
TIL 102, TIL 103
OPTOCOUPLERS
GALLIUM ARSENIDE DIODE INFRARED SOURCE OPTICALLY COUPLED
TO A HIGH-GAIN N-P-N SILICON PHOTOTRANSISTOR
Photon Coupling for Isolator Applications
Base Lead Provided for Conventional Transistor Biasing
High Overall Current Gain . . . 1.5 Typ (TIL 103)
High-Voltage Transistor... V(BR)CEO = 35 V Min
High-Voltage Electrical Isolation . . , 1-kV Rating
Stable over Wide Temperature Range
mechanical data
THE COLLECTOR IS IN ELECTRICAL CONTACT WITH THE CASE
NOTE a: Lead* having maximum dlamatar thai! h« with 0.18 mm [0.007 Inchai) of true
position r«tatlv9 to a maximum-width tab whan meaiurad In tha gaging plane
batwaan 1,371 mm (O.OS4 Inchai) and 1,397 mm [0.0&5 Inchtt) balow the Mating
plana.
ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES.
absolute maximum ratings at 25°C free-air temperature (unless otherwise noted)
Input-to-Output Voltage
Collector-emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Input Diode Reverse Voltage
Input Diode Continuous Forward Current at (or below) 65°C Free<Air Temperature (See Note I)
Continuous Collector Current
Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (See Note 2)
Storage Temperature Range
Lead Temperature 1.6mm (1/16 Inch) from Case for 10 Seconds
NOTES: 1. Oarata linaarty to 125"C fraa air tamparatura at tha rata of 0.67 mA/°C.
3. Darata linaarly to 125°C fraa air tamparatura at tha rate of 3 mW/^C.
. . . tlkV
. . . .35V
. . . . 35V
. . . . 4V
. . . . 2V
. . . 40mA
. . . 50mA
. . . 300 mW
-66°Cto126<1C
. . . 240°C
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensionswithout
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors