T4700 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 15-Ampere SiliconTriacs

^zmi-Conductoi Lpioducti, One.
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
15-Ampere Silicon Triacs
For Phase-Control and Load-Switching Applications
Features:
• 800V. 125 Deg. C Tj Operating
• High dv/dt and di/dt Capability
» Low Switching Losses
• High Pulse Current Capability
• Low Forward and Reverse Leakage
• Sipos Oxide Glass Multilayer Passivation System
• Advanced Unisurtace Construction
• Precise Ion Implanted Diflusion Source
TELEPHONE: [phone]
[phone]
FAX: [phone]
T4700 Series
TERMINAL DESIGNATIONS
JEDECTO-213AA
MAXIMUM RATINGS, Absolute-Maximum Values:
REPETITIVE PEAK OFF-STATE VOLTAGE:"
Gate Open .. .•
RMS ON-STATE CURRENT:
Tc « 95° C, conduction angle = 360°
PEAK SURGE (NON-REPETITIVE) ON-STATE CURRENT:
For one full cycle of applied principal voltage
60 Hz (sinusoidal)
For one full cycle of applied principal voltage
(SO-Hz, sinusoidal)
For more than one full cycle of applied voltage
PEAK GATE-TRIGGER CURRENT:
For 1 fjs max
FUSING CURRENT (fortriac protection):
Tj=-40to100°C, t = 1.25 to 10ms
GATE POWER DISSIPATION:
Peak* (for 1 us max. and IQTU = < 4 A)
Average (averaging time = 10 ms max.)
TEMPERATURE RANGE:A
Storage
Operating (Case)
PIN TEMPERATURE (During soldering):
At distances > 1/32 in. (0.8 mm) from
seating plane for 10 s max.
Vonou
ITIBMSI
ITSM
Pou
PG;AVI
T,,,
Tc
T4700B
T4700D
T4700M
T4700N
200
400
600
800
V
15
A
. 100.
A
85
A
See Fig. 3 .
4
A
.50.
A;s
_ 16-
W
_ 0.45 -
W
. -4010150 .
°c
. -4010125 .
•c
.225.
•For either polarity of main terminal 2 voltage (VMTj) with reference to main terminal 1.
•For either polarity of gate voltage (V0) with reference to main terminal 1.
±For temperature measurement reference point, see Dimensional Outline.
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to.be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors