SA5.0C Datasheet, PDF (1/4 Pages) New Jersey Semi-Conductor Products, Inc. – BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR

J.EIIE.U <^>£.mi-L,onau.ctoi
C/
t/
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
SA5.0C-SA170CA
VBR : 6.8 - 200 Volts
PPK : 500 Watts
On*.
TELEPHONE: [phone]
[phone]
FAX: [phone]
BIDIRECTIONAL TRANSIENT
VOLTAGE SUPPRESSOR
DO-41
FEATURES:
* 500W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less
then 1.0 ps from 0 volt to VBR(mjn (
* Typical IR less then 1|iA above 10V
* Pb / RoHS Free
MECHANICAL DATA
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
method 208 guaranteed
* Mounting position : Any
* Weight: 0.339 gram
DEVICES FOR UNIPOLAR APPLICATIONS
For uni-directional without "C"
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating
Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Notel)
Steady State Power Dissipation at Tu = 75 °C
Lead Lengths 0.375", (9.5mm) (Note 2)
Operating and Storage Temperature Range
0.107 (2.74)
0.080 (2.03)
0.034 (0.86)
0.028(0.71)
T
0(2!
- MMININ.
\)
0.205 (5.20)
0.160(4.10)
\!
1.00(25.4)
MIINN..
_L
Dimensions in inches and (millimeters)
Symbol
PPK
PD
TJ, TSTG
Value
Minimum 500
3.0
-65to + 175
Unit
w
w
°c
Note :
(1) Non-repetitive Current pulse, per Fig. 2 and derated above Ta = 25 °C per Fig. 1
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However.NJ Semi-Conductors assumes no responsibility for any errors or omissionsdiscovered in itsuse.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors