P6KE6.8A Datasheet, PDF (1/3 Pages) ON Semiconductor – 600 Watt Peak Power Surmetic-40 Zener Transient Voltage Suppressors

^>£.ml-L.on.au.ctoi L/^i
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
, Line.
TELEPHONE: [phone]
[phone]
FAX: [phone]
TRANSZORB® Transient Voltage Suppressors
DO-204AC (DO-15)
PRIMARY CHARACTERISTICS
VWM
5.8 V to 459 V
VBR uni-directional
6.8 V to 540 V
VBR bi-directional
6.8 V to 440 V
PPPM
600 W
PD
5.0 W
IFSM (uni-directional only)
100 A
Tj max.
175°C
Polarity
Uni-directional, bi-directional
Package
DO-204AC(DO-15)
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 600 W peak pulse power capability with a
10/1000 us waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10s, per JESD 22-B106
• AEC-Q101 qualified
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use CA suffix (e.g. P6KE440CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Peak pulse power dissipation with a 10/1000 us waveform(1) (fig. 1)
PPPM
600
Peak pulse current with a 10/1000 us waveform <1>
IPPM
See next table
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)
PD
5.0
Peak forward surge current 8.3 ms single half sine-wave <2>
IFSM
100
Maximum instantaneous forward voltage at 50 A for uni-directional only P)
VF
3.5/5.0
Operating junction and storage temperature range
Tj, TSTG
-55 to +175
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
<2> Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
<3> VF = 3.5 V for P6KE220A and below; V^S.O V for P6KE250A and above
Quality Semi-Conductors
UNIT
W
A
W
A
V
°C