P600A Datasheet, PDF (1/3 Pages) Pan Jit International Inc. – HIGH CURRENT PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 6.0 Amperes)

20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
, IJnc.
TELEPHONE: [phone]
[phone]
FAX: [phone]
P600A thru P600M
General Purpose Plastic Rectifier
P600
PRIMARY CHARACTERISTICS
Ip(AV)
6.0 A
VRRM
50V to 1000V
IFSM
400 A
VF
0.9V, 1,0V
IR
5.0 uA
Tj max.
150°C
FEATURES
• Low forward voltage drop
• Low leakage current
• High forward current capability
• High forward surge capability
• Solder dip 275 °C max. 10 s.
MECHANICAL DATA
Case: P600, void-free molded epoxy body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-8102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL P600A P600B
Maximum repetitive peak reverse voltage
VRRM
50
100
Maximum RMS voltage
Maximum DC blocking voltage
VRMS
35
70
VDC
50
100
Maximum average
current at
TA = 60 °C, 0.375" (9.5 mm)
lead length (fig. 1)
TL = 60 "C, 0.1 25" (3.18mm)
lead length (fig. 2)
lp(AV)
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
!PSM
Operating junction and storage temperature range Tj, TSTG
R6000 P600G P600J
200
400
600
140
280
420
200
400
600
6.0
22
400
- 5 0 t o + 150
P600K
800
560
800
P600M UNIT
1000
V
700
V
1000 V
A
A
°C
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors