P1086 Datasheet, PDF (1/2 Pages) Fairchild Semiconductor – P-Channel Switch

J.£,ii£,u ^zmi-donducto'i Lpioducti, Una.
\-S
LS
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
P1086
TELEPHONE: [phone]
[phone]
FAX: [phone]
P-Channel Switch
• This device is designed for low level analog switching sample and hold
circuits and chopper stabilized amplifiers.
• Sourced from process 88.
DSG
Absolute Maximum Ratings TC=25°C unless otherwise noted
Symbol
Parameter
Value
VDG
Drain-Gate Voltage
-30
VGS
Gate-Source Voltage
30
IGF
Forward Gate Current
50
Tj, TSTG
Operating and Storage Junction Temperature Range
-55- +150
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1. These ratings are based on a maximum junction temperature of 150 degrees C.
2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
TO-92
Units
V
V
mA
°C
Electrical Characteristics TC=25°C unless otherwise noted
Symbol
BV6SS
IGSS
lD(off)
Parameter
Gate-Source Breakdown Voltage
Gate Reverse Current
Drain Cutoff Leakage Current
Test Condition
VDS = OV,IG = 1uA
VGS = 15V
VDS = 15V
VGS = 12V
T = +85°C
'DGO
Drain-Gate Leakage Current
bss
VGS(off)
VDS(on)
rDs(°n)
rds(°n)
Ciss
Crss
td(on)
V
td(off)
tf
Zero-Gate Voltage Drain Current
Gate-Source Cutoff Voltage
Drain-Source On Voltage
Drain-Source On Resistance
Drain-Source On Resistance
Input Capacitance
Reverse Transfer Capacitance
Trun On Time
Rise Time
Trun Off Time
Fall Time
VDG = 15V
T = +85°C
VDS = 20V, VGS = OV
VDS = 15V, !D = 1jiA
VGS = 0V, ID = 6mA
VGS = OV, ID = 1mA
VGS = 0V, ID = 0 f = 1 k H z
VDS = 15V, VGS = OV, f= 1MHz
VDS = 0V, VGS = 12V, f= 1MHz
VDD = -6V
VGS(cff) = +12V
RL - 910H
Min. Typ. Max. Units
30
V
2
nA
10 nA
0.5 ^A
2
nA
0.1 HA
10
mA
10
V
0.5 V
75 n
75
Q
45 pF
10 pF
15 ns
20 ns
15 ns
50 ns
Thermal Characteristics TA=25°C unless otherwise noted
Symbol
PD
ROJC
R9JA
Parameter
Total Device Dissipation
Derate above 25°C
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
Max.
350
2.8
125
357
Units
mW
mW/°C
"C/W
°C/W
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to.be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumesno responsibility for any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheetsare current before placing orders.
Quality Semi-Conductors