MZ2360 Datasheet, PDF (1/2 Pages) New Jersey Semi-Conductor Products, Inc. – STABISTORS

^e-fni-^onductoi ^Product*, fine.
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
TELEPHONE: [phone]
[phone]
FAX: [phone]
APPLICATION
These axial lead diodes represent configurations of one to four* p-n junctions
in series which may be used in any application requiring light tolerance, low
voltage levels versus current. This method of low voltage regulation is com-
paritively superior in dynamic impedence (voltage change versus current) than
low voltage zeners where tunneling instead of avalanche current is dominant.
Typical applications include use as signal limiters, level shifters in transistor
logic, meter protectors, and low voltage regulators. For computer circuit ap-
plications, a controlled stored charge selection is provided as well.
In addition, these devices may be used for temperature compensation wherein
each p-n junction contributes approximately -2 mV/°C each.
•Consult factory for more than four p-n junction configurations.
DESCRIPTION/FEATURES
H Hermetically Sealed Glass Packages (DO-35)
B High Reverse Breakdown and Low Leakage
H Excellent Low Voltage Regulation
0 Controlled Stored Charge
E3 Planar Passivated Die Elements
MAXIMUM RATINGS
500 mW dc Power Rating**
Power Derating 4.0 mW/°C above 50°C
Junction and Storage Temperatures: -65"C to +175°C
"Consult factory for ratings up to I.5W.
IN4156, IN4157, IN4453,
IN4829, IN483O, IN5179
STABISTORS
Also, T\gt\t Tolerance
MPD100 thru MPD400A
or
MZ2360 and MZ2361
PACKAGE
DIMENSIONS
.010 MAX. I
2.03 OIA.
POLARITY
MARK •
(CAtHOOEl
.^.W^W-^&0,^J5^&59^. "rj^I"^{A —}
iffi ,
All dimensions in _n'"i.-n-i.
DO-35
MECHANICAL
CHARACTERISTICS
*Cnse: Hermetically sealed glass DO-35.
DO-7 and DO-41 glass are
optional. Single p-n junction
devices also offered in DO-41
plastic.
Finish: All external surfaces are
corrosion resistant and leads
solderable.
Thermal Resistance: 200° C/W typical
for DO-3S at 0.375
inches from body.
Mounting Position: Any.
Polarity: Cathode marked with band. To be
operated with cathode negative for
normal low voltage operation
• Designate case sin when ordering.
NJ Semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by NJ Semi-Conductors is believed to he both accurate and reliable at the time of going to press However NJ
Semi-CoinJuctor$ assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages
rs til v.-rit'v tli-
are rnrivnl hpt'i-irf ntarino nnleni