MJE16002 Datasheet, PDF (1/3 Pages) Mospec Semiconductor – POWER TRANSISTORS(5A,450V,80W)

{Pioducti, Una.
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
SWITCHMODE Series
NPN Silicon Power Transistors
These transistors are designed for high-voltage, high-speed switching of inductive
circuits where fall time and RBSOA are critical. They are particularly well-suited for
line-operated switchmode applications.
The MJE16004 is a high-gain version of the MJE16002 and MJH16002 for
applications where drive current is limited.
Typical Applications:
• Switching Regulators
• High Resolution Deflection Circuits
• Inverters
• Motor Drives
• Fast Switching Speeds
50 ns Inductive Fall Time @ 75°C (Typ)
70 ns Crossover Time @ 75°C (Typ)
• 100°C Performance Specified for:
Reverse-Biased SOA
Inductive Switching Times
Saturation Voltages
Leakage Currents
MJE16002*
MJE16004*
'Motorola Preferred Device
5.0 AMPERE
NPN SILICON
POWER TRANSISTORS
450 VOLTS
80 WATTS
TO-220AB
MAXIMUM RATINGS
Rating
Collector-Emitter Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Collector Current — Continuous
— Peak(1)
Base Current — Continuous
— Peak(1)
Total Power Dissipation @ TC = 25°C
@Tc = 100°C
Derate above TQ = 25°C
Operating and Storage Junction Temperature Range
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction to Case
Lead Temperature for Soldering Purposes: 1/8" from Case for 5 Seconds
(1) Pulse Test: Pulse Width = 5 ms, Duty Cycle < 10%.
Symbol
VCEO(SUS)
VCEV
VEB
ic
ICM
IB
!BM
PD
TJ. Tstg
Symbol
R9JC
TL
Value
450
850
6.0
5.0
10
4.0
8.0
80
32
0.64
-65 to +150
Max
1.56
275
Unit
Vdc
Vdc
Vdc
Adc
Adc
Watts
wrc
°c
Unit
°c/w
°c
Designer's Data for "Worst Case" Conditions — The Designer's Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit
curves — representing boundaries on device characteristics — are given to facilitate "worst case" design.
Preferred devices are Motorola recommended choices for future use and best overall value.
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished b> NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
N.I Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Ounlitv