English
Language : 

MCR72 Datasheet, PDF (1/2 Pages) Motorola, Inc – Silicon Controlled Rectifiers
^mi-Conductor ^Products., Una.
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
TELEPHONE: (973) 376-2922
(212)227-6005
FAX: (973) 376-8960
Silicon Controlled Rectifiers
Reverse Blocking Triode Thyristors
.. . designed for industrial and consumer applications such as temperature, light and
speed control; process and remote controls; warning systems; capacitive discharge
circuits and MPU interface.
• Center Gate Geometry for Uniform Current Density
• All Diffused and Glass-Passivated Junctions for Parameter Uniformity and
Stability
• Small, Rugged Thermowatt Construction for Low Thermal Resistance, High Heat
Dissipation and Durability
• Low Trigger Currents, 200 (jA Maximum for Direct Driving from Integrated Circuits
MCR72
SCRs
8 AMPERES RMS
50 thru 800 VOLTS
(TO-220AB)
MAXIMUM RATINGS (Tj = 25°C unless otherwise noted.)
Rating
Symbol
Value
Peak Repetitive Forward and Reverse Blocking VoltageO)
(Tj =-40 to 110°C,
1/2 Sine Wave, RQK = 1kQ)
MCR72-2
MCR72-3
MCR72-4
MCR72-6
MCR72-8
MCR72-10
VDRM
or
VRRM
50
100
200 .
400
600
800
On-State RMS Current (Tc = 83°C)
Peak Non-repetitive Surge Current
(1/2 Cycle, 60 Hz, Tj = -40 to 110°C)
!T(RMS)
8
!TSM
100
Circuit Fusing (t = 8.3 ms)
|2t
40
Peak Gate Voltage (t « 10 us)
Peak Gate Current (t s= 10 (is)
Peak Gate Power (t s; 10 us)
Average Gate Power
Operating Junction Temperature Range
VGM
]GM
PGM
PG(AV)
TJ
±5
1
5
0.75
-40to+110
for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage;
however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages
shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
Ounlifv
Unit
Volts
Amps
Amps
A2s
Volts
Amp
Watts
Watts
°c