|
MCR72-1 Datasheet, PDF (1/2 Pages) New Jersey Semi-Conductor Products, Inc. – Silicon Controlled Rectifier | |||
|
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
, One.
TELEPHONE: (973) 376-2922
(212)227-6005
FAX: (973) 376-8960
Silicon Controlled Rectifier
Reverse Blocking Triode Thyristor
... designed for industrial and consumer applications such as temperature, light
and speed control; process and remote controls; warning systems; capacitive
discharge circuits and MPU interface.
⢠Center Gate Geometry for Uniform Current Density
⢠All Diffused and Glass-Passivated Junctions for Parameter Uniformity and
Stability
⢠Small, Rugged Thermowatt Construction for Low Thermal Resistance, High Heat
Dissipation and Durability
⢠Low Trigger Currents, 200jiA Maximum for Direct Driving from Integrated
Circuits
MCR72-1
thru
MCR72-8
SCR*
8 AMPERES RMS
25 thru 600 VOLTS
TO-220AB
MAXIMUM RATINGS
Rating
Symbol
Value
Peak Repetitive Forward and Reverse Blocking Voltage (Note 1)
(Tj = -40 to 110°C)
(1/2 Sine Wave, RQK = 1 Ml)
-1
-2
-3
MCR72
-4
â¢5
-6
-7
-8
VDRM
or
VRRM
25
50
100
200
300
400
500
600
On-State RMS Current (TC = 83°C)
Peak Non-Repetitive Surge Current
(1/2 Cycle, 60 Hi, Tj = -40 to 110°C)
ITIRMSI
8
ITSM
100
Circuit Fusing (t = 1 to 8.3 ms)
|2t
40
Peak Gate Voltage (t «; 10 /«>)
Peak Gate Current (t =£ 10 /is)
Peak Gate Power (t =s 10 fj.s)
VGM
±5
IGM
1
PGM
5
Average Gate Power
Operating Junction Temperature Range
PG(AV)
TJ
0.75
-40 to +110
Note .1- Ratings apply for negative gate voltage or RQK = 1 kfl Devices shall not hive a positive gate voltaga concurrently with a
:?;.J negative voltage on the anode. Devices should not be tested with a constant current source for forward and reverse
blocking capability such that the voltage applied exceeds the rated blocking voltage.
Unit
Volts
Amps
Amps
A2s
Volts
Amp
Watts
Watts
â¢c
(com.)
Quality Semi-Conductors
|
▷ |