MCR65 Datasheet, PDF (1/2 Pages) Digitron Semiconductors – SILICON CONTROLLED RECTIFIER

JbEmi-Concluctoi ZPioducti, Una.
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
TELEPHONE: [phone]
[phone]
FAX: [phone]
Silicon Controlled Rectifiers
Reverse Blocking Triode Thyristors
... designed for industrial and consumer applications such as power supplies;
battery chargers; temperature, motor, light, and welder controls.
• Economical for a Wide Range of Uses
• High Surge Current — IjSM = 550 Amps
• Rugged Construction in Either Pressfit, Stud, or Isolated Stud
• Glass Passivated Junctions for Maximum Reliability
MCR63-( )A
Series
MCR64 Series
MCR65 Series
sens
55 AMPERES RMS
50 thru 800 VOLTS
MAXIMUM RATINGS (Tj -- 25°C unless otherwise noted.)
feting
Symbol
Value
Unit
Peak Repetitive Forward and Reverse Blocking Voltage, _VDRM
Note 1 (Tj = 25 to 125°C, Gate Open)
2
or
50
MCR63-I )A
MCR64-
3
VRRM
100
4
200
MCR65-
6
400
8
600
10
800
Volts
Non-Repetitive Peak Reverse Blocking Voltage
VRSM
(t s 5 ms). Note 1
2
75
MCR63-I (A
MCR64-
MCR65-
3
150
4
300
6
500
8
700
10
900
Volts
Forward Current RMS
Peak Surge Current
(One Cycle, 60 Hz, Tj = -40 to + 125°C)
'TIRMS)
55
ITSM
550
Amps
Amps
Circuit Fusing Considerations
(t • 8.3 ms)
ft
1255
A2s
Peak Gate Power
Average Gate Power {Pulse Width s 2 jis)
Peak Forward Gate Current
Peak Gala Voltage — Forward
Reverse
Operating Junction Temperature Range
PGFM
PQF(AV)
!GFM
VGFM
VGRM
TJ
20
0.5
2
10
10
-40 to +125
Watts
Watt
Amps
Volts
•c
Storage Temperature Range
Stud Torque
Tstg ^{-40 to +150}
°C
30
in, Ib.
Note 1. VDRM and VRRM tor all types can be applied on a continuous basis. Ratings apply For zero or
negative gats voltage; however, positive gate voltage shell not be applied concurrent with negative
potential on the anode Blocking voltage* shall not be tested with a constant current source such
that the voltage ratings of the devices are exceeded
CASE 283-04
STYLE!
MCR64 Series
CASE 174-04
STYLE 1
MCR63-I )A Series
CASE 311-02
STYLE 1
MCR65 S.riei
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
\,l Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
S«am 1-CnnAt i*-tnr«