MBRP30045CT Datasheet, PDF (1/2 Pages) Motorola, Inc – POWERTAP II SWITCHMODE™ Power Rectifiers

^e.mi-(lonductoi ^Pioaucti, Una.
4/
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
Preliminary Data Sheet
POWERTAP II
SWITCHMODE Power Rectifiers
. . . using the Schottky Barrier principle with a platinum barrier metal. These
state-of-the-art devices have the following features:
• Dual Diode Construction — May Be Paralleled for Higher Current Output
• Guardring for Stress Protection
• Low Forward Voltage
• 175°C Operating Junction Temperature
• Guaranteed Reverse Avalanche
Mechanical Characteristics:
• Case: Epoxy, Molded with metal heatsink base
• Weight: 80 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant
• Top Terminal Torque: 25^40 Ib-in max
• Base Plate Torques: See procedure given in the
Package Outline Section
• Shipped 25 units per foam
1 ° N"
2 o—K-
. Marking: B30045T, B30060T
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
MBRP30045CT
MBRP30060CT
Average Rectified Forward Current
(Rated VR) TC = 140°C
Per Device
Per Leg
Peak Repetitive Forward Current, Per Leg
(Rated VR, Square Wave, 20 kHz), TC = 140°C
Non-Repetitive Peak Surge Current Per Leg
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
Peak Repetitive Reverse Current, Per Leg (2.0us, 1.0 kHz)See Figure 6.
Operating Junction Temperature
Storage Temperature
Voltage Rate of Change (Rated VR)
THERMAL CHARACTERISTICS PER LEG
Thermal Resistance, Junction to Case
ELECTRICAL CHARACTERISTICS PER LEG
Instantaneous Forward Voltage (1)
0F = 1 50 Amps, Tj = 25°C)
(iF = 300 Amps, Tj = 25°C)
(iF = 1 50 Amps, Tj = 25°C)
(iF = 300 Amps, Tj = 25°C)
MBRP30045CT
MBRP30045CT
MBRP30060CT
MBRP30060CT
Instantaneous Reverse Current (1)
(Rated dc Voltage, Tj = 125°C)
(Rated dc Voltage, Tj = 25°C)
TELEPHONE: [phone]
[phone]
MBRP3OO45CT
MBRP3OO6OCT
SCHOTTKY BARRIER
RECTIFIERS
300 AMPERES
45 to 60 VOLTS
CASE 357C-03
POWERTAP II
Symbol
VRRM
VRWM
VR
'F(AV)
IFRM
Max
Unit
Volts
45
60
300
Amps
150
300
Amps
'FSM
2500
Amps
!RRM
Tj
Tstg
dv/dt
2.0
-55to+175
-55to+150
10000
Amps
°C
°c
V/ns
R0JC
0.45
°C/W
VF
Volts
0.70
0.82
0.79
0.89
IR
mA
75
0.8
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors