LC6.5 Datasheet, PDF (1/3 Pages) Microsemi Corporation – 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR

J.s.iis.1
C/
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
10 ducts., One.
TELEPHONE: [phone]
[phone]
FAX: [phone]
LC6.5thrul_C170A
1500 WATT LOW CAPACITANCE
TRANSIENT VOLTAGE SUPPRESSOR
DESCRIPTION
This hermetically sealed Transient Voltage Suppressor (TVS) product family
includes a rectifier diode element in series and opposite direction to achieve low
capacitance performance below 100 pF (see Figure 2). The low level of TVS
capacitance may be used for protecting higher frequency applications in
inductive switching environments or electrical systems involving secondary
lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for
airborne avionics. With virtually instantaneous response, they also protect from
ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient
capability is required, two of these low capacitance TVS devices may be used in
parallel in opposite directions (anti-parallel) for complete ac protection as shown
APPEARANCE
DO-13
MAXIMUM RATINGS
1500 Watts at 10/1000 MS with repetition rate of 0.01% or
less* at lead temperature (TL) 25°C (see Figs. 1, 2, & 4)
Operating & Storage Temperatures: -65° to +175°C
THERMAL RESISTANCE: 50°C/W (Typical) junction to
lead at 0.375 inches (10 mm) from body or 110°C/W
junction to ambient when mounted on FR4 PC board
with 4 mm2 copper pads (1 oz) and track width 1 mm,
length 25 mm
DC Power Dissipation*: 1 Watt at TL < +125°C 3/8" (10
mm) from body (see derating in Fig 3 and note below)
Solder Temperatures: 260 ° C for 10 s (maximum)
MECHANICAL AND PACKAGING
CASE: DO-13 (DO-202AA), welded, hermetically
sealed metal and glass
FINISH: All external metal surfaces are Tin-Lead
plated and solderable per MIL-STD-750 method 2026
POLARITY: Cathode connected to case as shown by
diode symbol (cathode positive for normal operation)
MARKING: Part number and polarity diode symbol
WEIGHT: 1.4 grams. (Approx)
TAPE & REEL option: Standard per EIA-296 (add
"TR" suffix to part number)
See package dimension on last page
NJ Semi-Conductors reserves the right to change test conditions,parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissionsdiscovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors