C380 Datasheet, PDF (1/3 Pages) Powerex Power Semiconductors – Phase Control SCR 250 Amperes Average 1600 Volts

20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
TELEPHONE: [phone]
[phone]
FAX: [phone]
The C380 Series of high power devices feature the proven, all-diffused construction
used in the C180 Series
Special characteristics of these new devices are:
• Pressure contacts
• Increased current capability when double-sided cooling is used
• Smaller size and lighter weight
• Reversibility eliminates need for special reverse polarity units
• Hermetically sealed
SCR
C380 SERIES
TYPE
MAXIMUM ALLOWABLE RATINGS
PEAK FORWARD BLOCKING
VOLTAGE, VpoM*
Tc = -40°C to + 120°C -
REPETITIVE PEAK REVERSE
VOLTAGE, VROM(rep)*
Tc=-400Cto + 120°C
TRANSIENT PEAK REVERSE VOLTAGE
(Non-recurrent <5 MUllsec. ),
VROM (non-rep) • * , - *
Tc * -40°C to -H20°C « • '
C380A
C380B
C380C
C380D
C380E
C380M
C380S
C380N
C380T
C380P
C380PA
C380PB
C380PC
100 Volts
200
300
400
500
600
700
800
900
1000
1100
1200
1300
100 Volts
200
300
400
500
600
700
800
900
1000
1100
1200
1300
200 Volts
300
400
500
600
720
840
950
1075
1200
1325
1450
1550
Average Forward Current, On-State
Peak One-Cycle Surge Forward Current, Ipj^(surge)
Maximum Rate of Rise of Anode Current During Turn-on Interval
(High Gate Drive Required, Chart 11) (Switching Rates $400 Hz.)
I't (for fusing) (for times ^ 1.5 milliseconds)
I^t (for fusing) (at 8,3 milliseconds)
Peak Gate Power Dissipation, PQM
Average Gate Power Dissipation, PG(AV)
Peak Reverse Gate Voltage, VQJ^
Storage and Operating Temperature, TC
External Force Required
Depends on conduction angle. (See Charts 1 and 3)
3500 amperes
Switch From <500V
lOOA/^sec
Switch From <1000V
75A/fisec
Switch From <1200V
50A//xsec
Switch From <1300V
25A//isec
32,000 ampere** seconds
50,000 ampere-* seconds
10 watts
2 watts
5 volts
-40°C to +120°C
800 Ibs. tlO%
'Ratings apply for zero or negative gate voltage. Maximum heatsink thermal resistance for which maximum PRY ratings apply
equal 1.5°C/watt.
_^
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility tor any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors