C137E Datasheet, PDF (1/3 Pages) New Jersey Semi-Conductor Products, Inc. – Silicon Controlled Rectifier

'I
C/
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
, Una.
TELEPHONE: [phone]
[phone]
FAX: [phone]
Controlled Rectifier
C137
35A RMS max., 500-1200 Volts,
125° C max. Junction Temperature
The C137 series of silicon controlled rectifiers are reverse blocking triode thyristor semiconductor devices
for use in medium power switching and phase control (50 to 400 Hz) applications requiring blocking volt-
ages up to 1200 volts, and overage load current (single-phase, 180° conduction angle) up to 23 amperes.
Special features of these SCR's:
• No peak forward voltage limitation
• Minimum dv/dt rating of 100 volts//isec.
• Maximum di/dt rating of 150 amps/A«ec when switching from 600 volts
• High surge current capability for overcurrent protection.
MAXIMUM ALLOWABLE RATINGS
Type
C137E
C137M
C137S
C137N
C137T
C137P
C137PB
Repetitive Peak
Off-State Voltage,
VDRM(1> (2)
Tc = -65°Cto +125°C
500 Volts
600 Volts
700 Volts
800 Volts
900 Volts
1000 Volts
1200 Volts
Repetitive Peak
Reverse Voltage
VRRM(1)(2)
Tc = -65°Cto+125°C
500 Volts
600 Volts
700 Volts
800 Volts
900 Volts
1000 Volts
1200 Volts
Non-repetitive Peak Off-State
and Reverse Voltage
VDSMandVRSM(D (3)
Tc = -65°Cto+125°C
600 Volts
720 Volts
840 Volts
960 Volts
1080 Volts
1200 Volts
1400 Volts
(1) Values apply for gate terminal open-circuited, (Negativegate bias is permissible.)
(2) Maximum case-to-ambient thermal resistance for which maximum V q R M and V R R M ratings apply equals S.OT per watt for full sine wave or
full-wave rectified sinusoidal voltage waveform. (3.0^ per watt is maximum case-to-ambient thermal resistance for pure do voltage waveform.)
(3) Half sine wave voltage pulse, 10 millisecond maximum duration.
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by N.I Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verity that datasheets are current before placing orders.
Quality Semi-Conductors