5KP Datasheet, PDF (1/4 Pages) Surge Components – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts

Jj£ii£ty e^E.ml-dona.ucto'i LPioaucti, One..
\s
U
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
TELEPHONE: [phone]
[phone]
FAX: [phone]
5KP SERIES
VRM : 5.0-180 Volts
PPK : 5000 Watts
FEATURES :
* 5000W Peak Pulse Power
* Excellent clamping capability
* Low incremental surge resistance
* Fast response time : typically less
then 1.0 ps from 0 volt to VBR(min >
* Typical IR less then 1 uA above 10V
MECHANICAL DATA
* Case : Molded plastic
* Epoxy : UL94V-0 rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Cathode polarity band
* Mounting position : Any
* Weight: 2.1 grams
DEVICES FOR BIPOLAR APPLICATIONS
For Bi-directional use C or CA Suffix
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating
Peak Pulse Power Dissipation at tp = 1ms
(Notel, Fig. 4)
Steady State Power Dissipation at TL = 75 °C
Lead Lengths 0.375", (9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
Operating and Storage Temperature Range
TRANSIENT VOLTAGE
SUPPRESSOR
0.360(9.1)
0.340 (8.6)
0.052(1.32)
0.048(1.22)
1.00(25.4)
- MIN.
0.360(9.1)
0.340 (8.6)
1.00(25.4)
WIN.
Dimensions in inches and (millimeters )
Symbol
PPK
PD
'FSM
Tji TSTG
Value
Minimum 5000
8.0
400
-55 to + 150
Unit
w
w
A
°C
Notes:
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1
(2) Mounted on Copper Leaf area of 0.79 in2 (20mm2).
(3) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.