1N5559 Datasheet, PDF (1/1 Pages) New Jersey Semi-Conductor Products, Inc. – DO-41 Case

J.E.IIS.U <~>£.mi-L.onau<2toi LPioauati, Line.
CX
*y
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
TELEPHONE: [phone]
[phone]
FAX: [phone]
DO-41 Case
° -»« -- -173 ±,002- ----- M«- °
1W
DO-41 Case
Typet
1NS559
1N5560
1N5561
1N5562
1 N5563
Nominal
Zener
Voltaae
Vz <5> Izr
V
6.8
7.5
8.2
9.1
10.0
Test
Current
Izr
mA
37
34
31
28
25
Maximum}
Dynamic
. Impedance
. ZZT <S> Izr
!!
—
Typical
Temperature
Coefficient
%/'C
1N5564
11
23
1N5565
12
21
1N5566
13
19
—
1N5567
15
17
—
1N5568
16
15
1N5569
18
14.0
1N5570
20
12.0
—
—
1N5571
22
11.0
1N5572
24
10.0
1 N5573
27
9.5
1N5574
30
1N5575
33
8.5
—
7.5
—.
tStandard tolerances of 5.0, 10, and 20% are available — no suffix is ±20% tolerance, "A" suffix is ±10%
tolerance, and "B" suffix is ±5.0% tolerance.
JZener impedance Is derived from the 1kHz voltage created when AC current with RMS value of 10% of DC zener
test current is superimposed on the test current.
1W
DO-41 Case
Typet
1N4400
1N4401
1N4402
1N4403
1N4404
1N4405
1N4406
1 N4407
1N4408
1N4409
1N4410
1N4411
1N4412
1N4413
1N4414
1N4415
1N4416
1N4417
1N4418
1N4419
1N4420
Nominal
Zener
Voltage
Vz @ Izi
V
6.8
7.5
8.2
9.1
10.0
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
Test
Current
IZT
mA
37
34
31
28
25
23
21
19
17
15
14.0
12.0
11.0
10.0
9.5
8.5
7.5
7.0
6.5
6.0
5.5
Maximum^
Dynamic
Impedance
Zzi @ lz>
o
2.0
2.0
2.0
2.5
3.0
3.5
4.0
5.0
6.0
8.0
10
11
12
13
14
15
17
19
21
23
26
Typical
Temperature
Coefficient
Tc
%/°C
—
—
—
—
—
—
—
—
—
—
_...
—
—
—
—•
—
—
—
—
—
—
1N4421
51
5.0
30
—
1N4422
56
4.5
33
—
1N4423
62
4.0
40
—
1 N4424
68
3.7
44
—
1N4425
75
3.3
60
—
1N4426
82
3.0
85
tStandard tolerances of 5.0, 10, and 20% are available — no suffix is ±20% tolerance, "A" suffix is ±10%
tolerance, and "B" suffix is ±5.0% tolerance.
}Zener impedance is derived from the 1kHz voltage created when AC current with RMS value of 10% of DC zener
test current is superimposed on the test current.
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Qualify Semi-Conductors