NJM3548 Datasheet, PDF (2/9 Pages) New Japan Radio – UNIVERSAL SOURCE DRIVER

s PIN CONFIGURATION
NJM3548
5
Output
4
Supply
3
GND
2
Input
1
Error
Figure 2. Pin Configuration
s PIN DESCRIPTION
TO-220
1
Symbol
Error
2
Input
3
GND
4
Supply
5
Output
Description
Error indicating pin. Sinks current to ground if the protection and/or detection circuitry is
activated.
Note: the current must be externally limited to 8 mA.
TTL compatible input. A HIGH input signal turns the output transistor off and a LOW
input turns it on. If the input is left open it will be detected as high level.
Ground supply.
Supply voltage. Nominally 5 V to 40 V.
Output pin. Current flows out from this pin through the load to GND. Nominal current is 8 mA
to 2 A.
Output Voltage
V_CC
V_CC - 0.5 V
V_CC - 1.3 V
NJM3548
Active Output
Short Circuit to V_CC Error
Undefined Area
Normal
Operation
V_CC - 3.0 V
Undefined Area
V_CC - 4.5 V
Overload or Short Circuit to GND Error
I_OMin
(min 2 mA, max 8 mA)
I _OS
(min 2 A, max 4.5 A)
Output
Current
NJM3548
Output Voltage Inactive Output
100% V_CC
Short Circuit to V_CC Error
50% V_CC
30% V_CC
Undefined Area
Normal Operation
Figure 3. Error state vs. output voltage and output current, active output
(0V≤ V_IN ≤ 0.8 V, 5 V < V_CC < 40 V and -40°C <+T_J >+100°C)
Figure 4. Error state vs. output
voltage, inactive output (2.0 V ≤ V_IN
≤ V_CC, 5 V ≤ V_CC ≤ 40 V and -40°C
<T_J <+100°C)