NJU6496 Datasheet, PDF (1/13 Pages) New Japan Radio – Quad PIN-Electronics Drivers / Comparators / Analog Switches

NJU6496
Quad PIN-Electronics Drivers / Comparators / Analog Switches
■ GENERAL DESCRIPTION
NJU6496 includes four-channel PIN Driver, Comparator, and Analog Switch for kelvin connection. It is
designed specifically for Test During Burn-In (TDBI) applications where cost, functional density, and power are all
at a premium. Driver is able to set up threshold voltage, and control high level and low level output voltage, and
high impedance independently. Comparator is able to control threshold voltage independently at each channel,
and set up high level and low level output voltage. Analog Switch that includes two switches for a SENSE and
FORCE in each channel is a switch for making Kelvin connection for current detection.
This device has a 15V driver output range and comparator input range. NJU6496 is suitable for an
interface to circuits, such as TTL, ECL, CMOS (3V, 5V and 7V), and LVCMOS, not only various tests
of a Flash Devices.
■ FEATURES
● 15V Input and Output Voltage Range
● Low Consumption Current
● Low Output Leakage Current : Ileak<2nA
● 45 MHz Operation
● Driver DC Output Current
: Io=125mA
● Package : QFN84-D4 (10.2mm x 10.2mm , t=0.2mm)
● CMOS Structure
■PACKAGE OUTLINE
NJU6496KD4
■ APPLICATION
● Burn-In Testers
● ATE
● Measuring Instrument
■ BLOCK DIAGRAM
*1) Driver, Comparator and SW shows per
1 channel.
*2) (0-3) is applied to one of a figure 0 to 3,
and it shows each channel.
*3) (0-1) and (0-8) is applied to one of a 0 to 1
or 0 to 8, and it is shortened within the IC.
ver.01
-1-