NJG1695ME7 Datasheet, PDF (1/12 Pages) New Japan Radio – High Isolation X-SP4T (DP8T) SWITCH

NJG1695ME7
High Isolation X-SP4T (DP8T) SWITCH
I GENERAL DESCRIPTION
The NJG1695ME7 is a GaAs X (cross) - SP4T (DP8T) switch
MMIC for switching of balanced (differential) mode filters. It
features low insertion loss and very high isolation for balanced
signal input.
The ESD protection circuits are integrated in the IC to achieve
high ESD tolerance.
The ultra-small and ultra-thin EQFN18-E7 package is adopted.
I PACKAGE OUTLINE
NJG1695ME7
*) The X-SP4T is a paired SP4T switch that features two identical SP4T switches being integrated into one chip. The two
SP4T switches are controlled synchronously, and their respective RF lines cross each other on the chip.
I APPLICATIONS
Switching of balanced type filters (Quad band) application
Suitable for 3G and LTE application
I FEATURES
G Low operation voltage
G Low control voltage
G High isolation
(Balanced mode)
G Low insertion loss
G Small package
V_DD=+1.5~+4.5V
V_CTL(H)=+1.35V min.
43dB typ. @f=1.0GHz, P_IN=0dBm
38dB typ. @f=2.0GHz, P_IN=0dBm
35dB typ. @f=2.7GHz, P_IN=0dBm
0.45dB typ. @f=1.0GHz, P_IN=0dBm
0.55dB typ. @f=2.0GHz, P_IN=0dBm
0.80dB typ. @f=2.7GHz, P_IN=0dBm
EQFN18-E7 (Package size: 2.0mm x 2.0mm x 0.397mm typ.)
G RoHS compliant and Halogen Free
G MSL 1
I PIN CONFIGURATION
(Top View)
1 ¹⁸
17
16
15 ₁₄
2
13
3
12
4
11
56
7
8
9 ¹⁰
1. GND
2. VDD
3. VCTL2
4. VCTL1
5. GND
6. P4A
7. P4B
8. P3A
9. P3B
10. GND
11. P2B
12. P2A
13. P1A
14. GND
15. P1B
16. GND(NC)
17. PCB
18. PCA
I TRUTH TABLE
ON PATH
PCA-P1A, PCB-P1B
PCA-P2A, PCB-P2B
PCA-P3A, PCB-P3B
PCA-P4A, PCB-P4B
“H”=V_CTL(H), “L”=V_CTL(L)
VCTL1 VCTL2
H
L
L
L
L
H
H
H
NOTE: The information on this datasheet is subject to change without notice.
Ver.2013-04-09
-1-