NJG1159PHH-TE1 Datasheet, PDF (1/20 Pages) New Japan Radio – GNSS Front-End Module

NJG1159PHH
GNSS Front-End Module
I GENERAL DESCRIPTION
The NJG1159PHH is a front-end module (FEM) designed for GNSS including
GPS, GLONASS, BeiDou, and Galileo applications. This FEM offers low noise
figure, high linearity, and high out-band rejection characteristics brought by
included high performance pre-SAW filter and low noise amplifier (LNA). This
FEM can operate from 1.5V to 3.3V single voltage in -40 to 105°C. This FEM has
stand-by mode to save current consumption.
This FEM offers very small mounting area by included one SAW filter, only two
external components, and very small package HFFP10-HH that is 1.5x1.1mm.
I PACKAGE OUTLINE
I FEATURES
G Available for GNSS
G Low supply voltage
1.8/ 2.8V typ.
G Low current consumption
G High gain
3.0/3.7mA typ. @V_DD=1.8/ 2.8V, V_CTL=1.8V
0.1µA typ.
@V_DD=1.8/ 2.8V, V_CTL=0V (Stand-by mode)
15.5/16.0dB typ. @V_DD=1.8/ 2.8V, V_CTL=1.8V,
f=1575MHz, 1559 to 1591MHz
G Low noise figure
1.55/1.50dB typ. @V_DD=1.8/ 2.8V, V_CTL=1.8V, f=1575MHz
G High out band rejection
1.70/1.65dB typ. @V_DD=1.8/ 2.8V, V_CTL=1.8V, f=1597 to 1606MHz
1.75/1.70dB typ. @V_DD=1.8/ 2.8V, V_CTL=1.8V, f=1559 to 1591MHz
55dBc typ.
@f=704 to 915MHz, relative to 1575MHz
43dBc typ.
@f=1710 to 1980MHz, relative to 1575MHz
51dBc typ.
@f=2400 to 2500MHz, relative to 1575MHz
G Small package size
HFFP10-HH: 1.5mmx1.1mm (typ.), t=0.5mm (max.)
G RoHS compliant and Halogen Free, MSL1
I PIN CONFIGURATION
1 pin index ^{(Top View)}
VDD
GND
1
9
VCTL
2
LNA
GND
Pre-Filter
3
PreIN
4
10
GND
LNAOUT
8
LNAIN
7
PreOUT
6
GND
5
I BLOCK DIAGRAM
V_CTL
V_DD
Pin Connection
1. VDD
2. VCTL
3. GND
4. PreIN
5. GND
RF IN
6. PreOUT
7. LNAIN
8. LNAOUT
9. GND
10. GND
Pre-Filter
LNA
GND
RF OUT
I TRUTH TABLE
“H”=V_CTL(H), “L”=V_CTL(L)
VCTL
Mode
H
Active mode
L
Stand-by mode
Note: Specifications and description listed in this datasheet are subject to change without notice.
Ver.2016-04-18
-1-