NJG1155UX2 Datasheet, PDF (1/19 Pages) New Japan Radio – GNSS LOW NOISE AMPLIFIER GaAs MMIC

NJG1155UX2
GNSS LOW NOISE AMPLIFIER GaAs MMIC
I GENERAL DESCRIPTION
The NJG1155UX2 is a LNA GaAs MMIC designed for GNSS
applications, like GPS, Galileo, GLONASS and COMPASS. The
NJG1155UX2 is featured low noise figure, and operates from 1.5V to
3.3V single voltage. The NJG1155UX2 has stand-by mode to save the
supply current, has the on-chip ESD protection devices.
The NJG1155UX2 achieves ultra small mounting area by only two
external components and ultra small package that is lead-free and
halogen-free 6-pin EPFFP6-X2 package.
I PACKAGE OUTLINE
NJG1155UX2
I FEATURES
G Operating frequencies
G Low supply voltage
G Low current consumption
G High gain
G Low noise figure
G Ultra small package
G Low external component count
G RoHS compliant and Halogen Free
G MSL1
1550~1615MHz
2.8 / 1.8V typ.
3.5 / 3.1mA typ. @V_DD=2.8 / 1.8V, V_CTL=1.8V
0.1µA typ.
@V_DD=2.8 / 1.8V, V_CTL=0V (Stand-by mode)
19.0 / 18.5dB typ. @V_DD=2.8 / 1.8V, V_CTL=1.8V
0.75dB typ.
@V_DD=2.8 / 1.8V, V_CTL=1.8V
EPFFP6-X2 (Package size: 1.1mm x 0.7mm x 0.37mm typ.)
2pcs.
I PIN CONFIGURATION
(Top View)
4
GND
RFIN
5
3
Pin connection
1. GND
RFOUT
2. VDD
3. RFOUT
4. GND
5. RFIN
VDD
6. VCTL
2
I TRUTH TABLE
V_CTL
LNA mode
H
Active mode
L
Stand-by mode
“H”=V_CTL(H), “L”=V_CTL(L)
VCTL
GND
1 Pin INDEX
6
1
Note: Specifications and description listed in this datasheet are subject to change without notice.
Ver.2013-03-15
-1-