NJG1150UA2 Datasheet, PDF (1/18 Pages) New Japan Radio – GNSS LOW NOISE AMPLIFIER GaAs MMIC

NJG1150UA2
GNSS LOW NOISE AMPLIFIER GaAs MMIC
I GENERAL DESCRIPTION
The NJG1150UA2 is a LNA GaAs MMIC designed for GNSS applications,
like GPS, Galileo, GLONASS and COMPASS. The NJG1150UA2 is featured
low noise figure and low distortion, and operates from 1.5V to 3.3V single
voltage. The NJG1150UA2 has stand-by mode to save the supply current,
has the on-chip ESD protection devices.
The NJG1150UA2 achieves very small mounting area by only two external
components and very small package that is lead-free and halogen-free 6-pin
EPFFP6-A2 package.
I PACKAGE OUTLINE
NJG1150UA2
I FEATURES
G Low supply voltage
G Low current consumption
G High gain
G Low noise figure
G High input IP3
G High out of band input IP3
G Small package
G RoHS compliant and Halogen Free
G MSL 1
1.8/ 2.8V typ.
4.2 / 4.9mA typ. @V_DD=1.8/ 2.8V, V_CTL=1.8V
0.1µA typ.
@V_DD=1.8/ 2.8V, V_CTL=0V (Stand-by mode)
16.0dB typ. @V_DD=1.8/ 2.8V, V_CTL=1.8V, f=1575MHz
0.6dB typ.
@V_DD=1.8/ 2.8V, V_CTL=1.8V, f=1575MHz
-1 / +1dBm typ. @V_DD=1.8/ 2.8V, V_CTL=1.8V, f=1575+1575.1MHz
+5 / +6dBm typ. @V_DD=1.8/ 2.8V, V_CTL=1.8V, f=1712.7+1850MHz
EPFFP6-A2 (Package size: 1.0mmx1.0mmx0.37mm typ.)
I PIN CONFIGURATION
(Top View)
GND
5
6
4
VCTL
VDD
1Pin INDEX
RFIN
1
2
GND
RFOUT
3
Pin connection
1. RFIN
2. GND
3. RFOUT
4. VDD
5. GND
6. VCTL
I TRUTH TABLE
“H”=V_CTL(H), “L”=V_CTL(L)
VCTL
H
L
LNA Mode
Active mode
Stand-by mode
Note: Specifications and description listed in this datasheet are subject to change without notice.
Ver.2012-08-16
-1-