NJG1145UA2 Datasheet, PDF (1/20 Pages) New Japan Radio – WIDE BAND LOW NOISE AMPLIFIER GaAs MMIC

NJG1145UA2
WIDE BAND LOW NOISE AMPLIFIER GaAs MMIC
I GENERAL DESCRIPTION
The NJG1145UA2 is a fully matched wide band low noise
amplifier GaAs MMIC for digital TV and BS/CS applications. This
amplifier covers VHF, UHF, and L bands.
To achieve wide dynamic range, the NJG1145UA2 offers high
gain mode and low gain mode. Selecting high gain mode for weak
signals, the NJG1145UA2 helps improve receiver sensitivity
through high gain and low noise figure. Selecting low gain mode
for strong signals, it bypasses LNA circuit to offer higher linearity.
In high gain mode, the NJG1145UA2 achieves high gain and
high IIP3 across the band.
The ESD protection circuits are integrated into the MMIC. They
achieve high ESD protection voltage.
An ultra-small and ultra-thin package of EPFFP6-A2 is adopted.
I PACKAGE OUTLINE
NJG1145UA2
I FEATURES
G Wide operating frequency range
G Low voltage operation
G External components count
G Small package size
[High gain mode]
G Current consumption
G High gain
G Low noise figure
[Low gain mode]
G Low current consumption
G Gain(Low loss)
90MHz~2150MHz
2.8V typ.
3pcs. (capacitor: 2pcs, inductor: 1pc)
EPFFP6-A2 (package size: 1.0mmx1.0mmx0.37mm typ.)
20mA typ.
+15.0dB typ.
1.5dB typ.
11µA typ.
-1.0dB typ.
I PIN CONFIGURATION
(Top View)
RFIN
5 GND
VCTL
6
4
Logic
circuit
Bypass circuit
1PIN INDEX
LNA circuit
Bias
circuit
1
GND
GND 2
3
RFOUT
Pin Connection
1. GND
2. GND
3. RFOUT
4. VCTL
5. GND
6. RFIN
I TRUTH TABLE
V_CTL
H
L
“H”=V_CTL(H)“L”=V_CTL(L)
LNA ON
Bypass
ON
OFF
OFF
ON
LNA mode
High Gain mode
Low Gain mode
Note: Specifications and description listed in this datasheet are subject to change without notice.
Ver.2010-10-01
-1-