UUR1V221MNL1GS Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
UR Chip Type, High CV
series
Chip type, higher capacitance in larger case sizes.
Designed for surface mounting on high density PC board.
Applicable to automatic mounting machine fed with carrier tape.
Compliant to the RoHS directive (2011/65/EU).
UG
Extended
range
WS
High
Temperature
Reflow
UR
Specifications
Higher
C/V
WX
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to +85°C
4 to 100V
3.3 to 1500µF
± 20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is not more than 0.03CV (µA) .
Measurement frequency : 120Hz at 20°C
Rated voltage (V)
tan δ (MAX.)
4
0.35
6.3
0.28
10
0.24
16
0.20
25
0.16
35
0.14
50
0.12
63
0.12
100
0.12
Measurement frequency: 120Hz
Rated voltage (V)
4
6.3
10
16
25
35
50
63
100
Impedance ratio Z– 25°C / Z+20°C
7
5
4
3
2
2
2
2
2
ZT / Z20 (MAX.) Z– 40°C / Z+20°C
15
10
8
6
4
3
3
3
3
Endurance
The specifications listed at right shall be met when
the capacitors are restored to 20°C after the rated
voltage is applied for 2000 hours at 85°C.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Shelf Life
Resistance to soldering
heat
Marking
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
The capacitors are kept on a hot plate for 30 seconds,
which is maintained at 250°C. The capacitors shall meet
the characteristic requirements listed at right when they
are removed from the plate and restored to 20°C.
Capacitance change
tan δ
Leakage current
Within ±10% of the initial capacitance value
Less than or equal to the initial specified value
Less than or equal to the initial specified value
Black print on the case top.
Chip Type
(φ6.3, φ8 × 6.2)
Plastic platform
Capacitance
2 Voltage
0.3MAX.
Lot No.
1
Trade mark
L±0.3
1 Size φ8 × 6.2 only
2 Voltage mark for 6.3V is 6V .
C±0.2
Positive
Negative
H
Type numbering system (Example : 10V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UUR 1 A 1 0 1 M C L 1GS
Capacitance tolerance (±20%)
Rated capacitance (100µF)
Rated voltage (10V)
Series name
Type
Package code
Size code
Configuration
φD×L
6.3 × 5.8
6.3 × 7.7
8 × 6.2
8 × 10
10 × 10
Code
CL
CL
CL
NL
NL
(φ8 × 10, φ10 × 10)
Lot No.
Trade mark
Plastic platform
Capacitance
0.3MAX.
2 Voltage
C±0.2
Positive
L±0.5
Pressure relief vent
Dimension table in next page.
Negative
H
φ D × L _{6.3 × 5.8}
A
2.4
B
6.6
C
6.6
E
2.2
L
5.8
H
0.5 to 0.8
6.3 × 7.7
2.4
6.6
6.6
2.2
7.7
0.5 to 0.8
8 × 6.2
3.3
8.3
8.3
2.3
6.2
0.5 to 0.8
8 × 10
2.9
8.3
8.3
3.1
10
0.8 to 1.1
(mm)
10 × 10
3.2
10.3
10.3
4.5
10
0.8 to 1.1
CAT.8100C