UUR0G151MCL Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
UR Chip Type, High CV
series
Chip type, higher capacitance in larger case sizes.
Designed for surface mounting on high density PC board.
Applicable to automatic mounting machine using carrier tape.
Adapted to the RoHS directive (2002/95/EC).
UG
Extended
range
WS
High
Temperature
Reflow
UR
Specifications
Higher
C/V
WX
Item
Performance Characteristics
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
tan δ
– 40 ~ +85°C
4 ~ 100V
3.3 ~ 1500µF
± 20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is not more than 0.03CV (µA) .
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V)
4
6.3
10
16
25
35
50
63
100
tan δ (MAX.)
0.35
0.28
0.24
0.20
0.16
0.14
0.12
0.12
0.12
Measurement frequency: 120Hz
Rated voltage (V)
4
6.3
10
16
25
35
50
63
100
Stability at Low Temperature _{Impedance ratio Z– 25°C / Z+20°C}
7
5
4
3
2
2
2
2
2
ZT / Z20 (MAX.) Z– 40°C / Z+20°C
15
10
8
6
4
3
3
3
3
Endurance
After 2000 hours' application of rated voltage
at 85°C, capacitors meet the characteristic
requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±20% of initial value
200% or less of initial specified value
Initial specified value or less
Shelf Life
Resistance to soldering
heat
Marking
After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
The capacitors shall be kept on the hot plate maintained at 250°C,
for 30 seconds. After removing from the hot plate and restored
at room temperature, they meet the characteristic requirements
listed at right.
Capacitance change
tan δ
Leakage current
Within ±10% of initial value
Initial specified value or less
Initial specified value or less
Black print on the case top.
Chip Type
(φ6.3, φ8 × 6.2)
Plastic platform
Capacitance
2 Voltage
0.3MAX.
Lot No.
1
Trade mark
C±0.2
1 Size φ8 × 6.2 only
L±0.3
H
2 Voltage mark for 6.3V is 6V .
In case of marking for φ3 units, "V" for rated voltage is omitted.
Positive
Negative
Type numbering system (Example : 10V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UUR 1 A 1 0 1 M C L 1GS
Capacitance tolerance (±20%)
Rated Capacitance (100µF)
Rated voltage (10V)
Series name
Type
Package code
Size code
Configuration
φD×L
6.3 × 5.8
6.3 × 7.7
8 × 6.2
8 × 10
10 × 10
Code
CL
CL
CL
NL
NL
(φ8 × 10, φ10 × 10)
Lot No.
Trade mark
Plastic platform
Capacitance
0.3MAX.
2 Voltage
C±0.2
Positive
L±0.5
Pressure relief vent
Negative
H
φD×L
A
B
C
E
L
H
6.3 × 5.8
2.4
6.6
6.6
2.2
5.8
0.5 ~ 0.8
6.3 × 7.7
2.4
6.6
6.6
2.2
7.7
0.5 ~ 0.8
8 × 6.2
3.3
8.3
8.3
2.3
6.2
0.5 ~ 0.8
8 × 10
2.9
8.3
8.3
3.1
10
0.8 ~ 1.1
(mm)
10 × 10
3.2
10.3
10.3
4.5
10
0.8 ~ 1.1
Dimension table in next page.
CAT.8100V