UUL1V470MNL1GS Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
UL Chip Type, Long Life Assurance
series
Chip type with load life of 5000 hours at +105°C.
Designed for surface mounting on high density PC board.
Compliant to the RoHS directive (2002/95/EC).
CB ^{Long Life}
UL
Long Life _UA
Specifications
Item
Performance Characteristics
Category Temperature Range – 40 to +105°C
Rated Voltage Range
6.3 to 50V
Rated Capacitance Range 0.1 to 1000µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA), Max
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
6.3
0.32
10
0.24
16
0.20
Measurement frequency : 120Hz at 20°C
25
35
50
0.16
0.13
0.12
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
16
25
35
50
Stability at Low Temperature _{Impedance ratio Z– 25°C / Z+20°C}
4
3
2
2
2
2
ZT / Z20 (MAX.) Z– 40°C / Z+20°C
10
7
5
3
3
3
Endurance
Shelf Life
Resistance to soldering
heat
Marking
The specifications listed at right shall be met
when the capacitors are restored to 20°C after the
rated voltage is applied for 5000 hours at 105°C.
Capacitance change
tan δ
Leakage current
Within ±30% of the initial capacitance value
300% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
The capacitors are kept on a hot plate for 30 seconds, which is
maintained at 250°C. The capacitors shall meet the characteristic
requirements listed at right when they are removed from the plate
and restored to 20°C.
Capacitance change
tan δ
Leakage current
Within ±10% of the initial capacitance value
Less than or equal to the initial specified value
Less than or equal to the initial specified value
Black print on the case top.
Chip Type
(φ4 to φ6.3)
Voltage (C : 16V) ^Series
Plastic platform
0.3 MAX.
C±0.2
Positive
Lot No.
Capacitance
(φ8 to φ10 )
Voltage (V : 35V)
Series
Trade mark
L±0.3
H
Plastic platform
0.3 MAX.
C±0.2
Negative
Positive
Lot No.
Voltage
V 6.3
Code j
Capacitance
L±0.5
Pressure relief vent
10 16 25 35 50
ACEVH
Dimension table in next page.
Negative
H
Type numbering system (Example : 16V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UUL 1C 1 0 1 M CL 1GS
Package code
Configuration
Capacitance tolerance (±20%)
Rated capacitance (100 µF)
Rated voltage (16V)
φD
4 to 6.3
8 • 10
Code
CL
NL
Series name
Type
φ D × L _{4 × 5.8}
5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10
(mm)
10 × 10
A
1.8
2.1
2.4
2.4
2.9
3.2
B
4.3
5.3
6.6
6.6
8.3
10.3
C
4.3
5.3
6.6
6.6
8.3
10.3
E
1.0
1.3
2.2
2.2
3.1
4.5
L
5.8
5.8
5.8
7.7
10
10
H
0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1
CAT.8100B