UUL0J220MCL Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
UL Chip Type, Long Life Assurance
series
Chip type with load life of 5000 hours at +105°C.
Designed for surface mounting on high density PC board.
Adapted to the RoHS directive (2002/95/EC).
CB ^{Long Life}
UL
Long Life _UA
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
tan δ
Stability at Low Temperature
Performance Characteristics
– 40 ~ +105°C
6.3 ~ 50V
0.1 ~ 1000µF
± 20% at 120Hz, 20°C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA), Max
Rated voltage (V)
tan δ (MAX.)
6.3
0.32
10
0.24
Measurement frequency : 120Hz, Temperature : 20°C
16
25
35
50
0.20
0.16
0.13
0.12
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
16
25
35
50
Impedance ratio Z– 25°C / Z+20°C
4
3
2
2
2
2
ZT / Z20 (MAX.) Z– 40°C / Z+20°C
10
7
5
3
3
3
Endurance
Shelf Life
Resistance to soldering
heat
Marking
After 5000 hours' application of rated voltage at
105°C , capacitors meet the characteristic
requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±30% of initial value
300% or less of initial specified value
Initial specified value or less
After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
The capacitors shall be kept on the hot plate maintained at 250°C
for 30 seconds. After removing from the hot plate and restored
at room temperature, they meet the characteristic requirements
listed at right.
Capacitance change
tan δ
Leakage current
Within ±10% of initial value
Initial specified value or less
Initial specified value or less
Black print on the case top.
Chip Type
(φ4 ~ 6.3)
Voltage (C : 16V) ^Series
Plastic platform
0.3 MAX.
C±0.2
Positive
Lot No.
Capacitance
(φ8 ~ 10 )
Voltage (V : 35V)
Series
Trade mark
L±0.3
H
Plastic platform
0.3 MAX.
C±0.2
Negative
Positive
Lot No.
Voltage
V 6.3
Code j
Capacitance
L±0.5
Pressure relief vent
10 16 25 35 50
ACEVH
Dimension table in next page.
Negative
H
Type numbering system (Example : 16V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UUL 1C 1 0 1 M CL 1GS
Package code
Configuration
Capacitance tolerance (–20%)
Rated Capacitance (100 µF)
Rated voltage (16V)
φD
4 ~ 6.3
8 ¥ 10
Code
CL
NL
Series name
Type
φ D × L _{4 × 5.8}
A
1.8
B
4.3
C
4.3
E
1.0
L
5.8
H
0.5 ~ 0.8
5 × 5.8
2.1
5.3
5.3
1.3
5.8
0.5 ~ 0.8
6.3 × 5.8
2.4
6.6
6.6
2.2
5.8
0.5 ~ 0.8
6.3 × 7.7
2.4
6.6
6.6
2.2
7.7
0.5 ~ 0.8
8 × 10
2.9
8.3
8.3
3.1
10
0.8 ~ 1.1
(mm)
10 × 10
3.2
10.3
10.3
4.5
10
0.8 ~ 1.1
CAT.8100V