UUE1H331MNS1MS Datasheet, PDF (1/1 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
UE Chip Type , Vibration Resistance
series
Chip type with load life of 2000 to 5000 hours at 125°C.
Suited for automobile electronics where heavy duty
services are indispensable.
Compliant to the RoHS directive (2011/65/EU).
UB Vibration
Resistance
UE
Specifications
Item
Performance Characteristics
Category Temperature Range – 55 to +125°C ( φ 12.5 to 20) – 40 to +125°C ( φ 8 , φ 10)
Rated Voltage Range
10 to 50V
Rated Capacitance Range 33 to 4700µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater.
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Tangent of loss angle
(tan δ)
Rated voltage (V)
tan δ
(MAX)
φ 8 • φ 10
φ 12.5 to φ 20
10
0.26
0.22
16
0.20
0.18
25
0.16
0.16
35
0.14
0.14
50
0.14
0.12
120Hz
20°C
Rated voltage (V)
10
16
25
35
50
120Hz
Stability at Low Temperature ^{Impedance ratio}
φ 8 • φ 10
10
8
6
4
4
Z–40°C / Z+20°C
(MAX)
φ 12.5 to φ 20
8
6
4
3
3
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 5000 hours (2000 hours for φ D = 8 and 10) at 125°C.
Capacitance change Within ±30% of the initial capacitance value
tan δ
300% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Shelf Life
Marking
After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Black print on the case top.
Chip Type
(φ8 to φ10)
125°C Marking
Trade mark
Capacitance
Voltage
Plastic platform
0.3 MAX.
C±0.2
Lot N0.
L±1.0
Pressure relief vent
H
φ8 to φ10 The standard structure product is also available upon request, please refer to page146(UB series).
(φ12.5 to φ20)
Trade mark
Voltage
Lot No.
Plastic platform
0.3 MAX.
Cʶ0.2
0.5MAX.
Series
L±1.0
Capacitance
Pressure relief vent
H
Aid electrode
φ12.5 to φ20 The standard structure product is also available upon request, please ask for details.
Type numbering system (Example : 50V 330µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UUE 1 H 3 3 1 M NS 1 MS
Package code
φ8 10
φ12.5 to 20
φ12.5 to 20
Size code
Taping GS
Taping MS
Tray
ZD
Configuration
Capacitance Tolerance(±20%)
φD
Code
Rated capacitance(330µF) ^{8 to 18}
NS
Rated voltage(50V)
20
RS
Series name
Type
φD ₈
(mm)
10 12.5 16
18
20
A
2.9
3.2
4.8
5.4
6.4
6.2
B
8.3 10.3 13.6 17.1 19.1 21.1
C
8.3 10.3 13.6 17.1 19.1 21.1
E
3.1
4.5
4.0
6.3
6.3
8.8
H 1.1 to 1.5 1.1 to 1.5 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.3 to 1.7
Dimensions
V
10
Cap.(µF)
Code
1A
33 330
47 470
100 101
220 221
8 × 10
140
330 331
10 × 10
190
470 471
12.5 × 13.5
750
680 681
12.5 × 16
900
16
1C
8 × 10
10 × 10
12.5 × 13.5
12.5 × 13.5
16 × 16.5
1000 102
12.5 × 16
900
18 × 16.5
2200 222
3300 332
4700 472
18 × 16.5
16 × 21.5
18 × 16.5
18 × 21.5
1200
1200
1200
1550
18 × 16.5
In this case, 6 will be put at 12th digit of type numbering system, " "
Frequency coefficient of rated ripple current
φD
φ 8 • φ 10
Frequency
Cap.(µF)
33 to 330
100 to 680
φ 12.5 to φ 20
1000 to 4700
50 Hz
0.47
0.53
0.74
120 Hz
0.67
0.67
0.87
300 Hz
0.78
0.82
0.96
1 kHz
0.91
0.89
0.98
140
190
750
750
1000
1200
1200
10 kHz or more
1.00
1.00
1.00
25
1E
8 × 10
10 × 10
12.5 × 13.5
16 × 16.5
18 × 16.5
16 × 21.5
18 × 21.5
140
190
750
1000
1200
1200
1550
35
1V
8 × 10
10 × 10
12.5 × 13.5
16 × 16.5
16 × 16.5
18 × 16.5
20 × 21.5
18 × 21.5
100
150
550
1000
1000
1200
1400
1400
50
1H
8 × 10
90
10 × 10
130
12.5 × 13.5
500
16 × 16.5
850
16 × 16.5
850
18 × 16.5
950
Case size
φ D × L (mm)
Rated
ripple
Rated ripple current (mArms) at 125°C 100kHz
Taping specifications are given in page 23.
Recommended land size, soldering by reflow are given
in page 18, 19.
Please refer to page 3 for the minimum order quantity.
CAT.8100C