UUA1A101MCL1GS Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
UA 6mmL Chip Type, Long Life Assurance
series
Chip type with load life of 3000 to 5000 hours at +105°C.
Designed for surface mounting on high density PC board.
Compliant to the RoHS directive (2002/95/EC).
UL Long Life
UA
Long Life UT
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 55 to +105°C
6.3 to 50V
0.1 to 1000µF
± 20% at 120Hz, 20°C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater.
Measurement frequency : 120Hz at 20°C
Rated voltage (V)
tan δ (MAX.)
6.3
0.28
10
0.24
16
0.20
25
0.16
35
0.13
50
0.12
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
16
25
35
50
Impedance ratio Z– 25°C / Z+20°C
4
3
2
2
2
2
ZT / Z20 (MAX.) Z– 55°C / Z+20°C 10
7
5
3
3
3
Endurance
Shelf Life
Resistance to soldering
heat
Marking
The specifications listed at right shall be met
when the capacitors are restored to 20°C
after the rated voltage is applied for 5000
hours (3000 hours for φD = 4, 5 and 6.3) at
105°C.
Capacitance change
tan δ
Leakage current
Within ±30% of the initial capacitance value
300% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
The capacitors are kept on a hot plate for 30 seconds, which is
maintained at 250°C. The capacitors shall meet the characteristic
requirements listed at right when they are removed from the plate
and restored to 20°C.
Capacitance change
tan δ
Leakage current
Within ±10% of the initial capacitance value
Less than or equal to the initial specified value
Less than or equal to the initial specified value
Black print on the case top.
Chip Type
(φ4 to φ6.3)
Voltage ( j : 6.3V)
Series
Plastic platform
0.3MAX.
C±0.2
Positive
Lot No.
Capacitance
L±0.3
Negative
H
(φ8 × 10, φ10 × 10 )
Voltage ( V : 35V)
Trade mark
Series
Plastic platform
0.3MAX.
C±0.2
Positive
Lot No.
Capacitance
L±0.5
Pressure relief vent
Voltage
V 6.3 10 16 25 35 50
Code j A C E V H
Negative
H
Type numbering system (Example : 16V 10µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UUA 1 C 1 0 0 MC L 1 GS
Capacitance tolerance (±20%)
Rated capacitance (10 µF)
Rated voltage (16V)
Series name
Type
Taping code
Configuration
φD
4 to 6.3
8 • 10
Code
CL
NL
φD × L _{4 × 5.8}
5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10
(mm)
10 × 10
A
1.8
2.1
2.4
2.4
2.9
3.2
B
4.3
5.3
6.6
6.6
8.3
10.3
C
4.3
5.3
6.6
6.6
8.3
10.3
E
1.0
1.3
2.2
2.2
3.1
4.5
L
5.8
5.8
5.8
7.7
10
10
H
0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1
Dimension table in next page.
CAT.8100B