UUA0J220MCL Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
UA 6mmL Chip Type, Long Life Assurance
series
Chip type with load life of 3000~5000 hours at +105°C.
Designed for surface mounting on high density PC board.
Adapted to the RoHS directive (2002/95/EC).
UL Long Life
UA
Long Life UT
Specifications
Item
Performance Characteristics
Category Temperature Range – 55 ~ +105°C
Rated Voltage Range
6.3 ~ 50V
Rated Capacitance Range 0.1 ~ 1000µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
tan δ
After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V)
tan δ (MAX.)
6.3
0.28
10
0.24
16
0.20
25
0.16
35
0.13
50
0.12
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
16
25
35
50
Stability at Low Temperature _{Impedance ratio Z– 25°C / Z+20°C}
4
3
2
2
2
2
ZT / Z20 (MAX.) Z– 55°C / Z+20°C 10
7
5
3
3
3
Endurance
Shelf Life
Resistance to soldering
heat
Marking
After 3000 hours' (5000 hours for φ8, φ10)
application of rated voltage at 105°C ,
capacitors meet the characteristic
requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±30% of initial value
300% or less of initial specified value
Initial specified value or less
After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
The capacitors shall be kept on the hot plate maintained at 250°C
for 30 seconds. After removing from the hot plate and restored
at room temperature, they meet the characteristic requirements
listed at right.
Capacitance change
tan δ
Leakage current
Within ±10% of initial value
Initial specified value or less
Initial specified value or less
Black print on the case top.
Chip Type
(φ4 ~ 6.3)
Voltage ( j : 6.3V)
Series
Plastic platform
0.3MAX.
C±0.2
Positive
Lot No.
Capacitance
L±0.3
H
Negative
(φ8 × 10, φ10 × 10 )
Voltage ( V : 35V)
Trade mark
Series
Plastic platform
0.3MAX.
C±0.2
Positive
Lot No.
Capacitance
L±0.5
Pressure relief vent
Voltage
V 6.3 10 16 25 35 50
Code j A C E V H
H
Negative
Type numbering system (Example : 16V 10µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UUA 1 C 1 0 0 MC L 1 GS
Capacitance tolerance (–20%)
Rated Capacitance (10 F)
Rated voltage (16V)
Series name
Type
Taping code
Configuration
φD
4 ~ 6.3
8 ¥ 10
Code
CL
NL
φD × L _{4 × 5.8}
5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10
(mm)
10 × 10
A
1.8
2.1
2.4
2.4
2.9
3.2
B
4.3
5.3
6.6
6.6
8.3
10.3
C
4.3
5.3
6.6
6.6
8.3
10.3
E
1.0
1.3
2.2
2.2
3.1
4.5
L
5.8
5.8
5.8
7.7
10
10
H
0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1
Dimension table in next page.
CAT.8100V