USF0J330MDD Datasheet, PDF (1/1 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
SF 7mmL, Low Impedance
series
Low impedance over wide temperature range of – 55 ~ +105˚C, with 7mm height.
Adapted to the RoHS directive (2002/95/EC).
SF
Low
Impedance
ST
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
tan δ
Stability at Low Temperature
Performance Characteristics
– 55 ~ +105˚C
6.3 ~ 35V
6.8 ~ 220µF
± 20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Rated voltage (V)
tan δ (MAX.)
6.3
0.18
10
0.16
Measurement frequency : 120Hz, Temperature : 20˚C
16
25
35
0.14
0.12
0.12
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
16
25
35
Impedance ratio Z– 25˚C / Z+20˚C
2
2
2
2
2
ZT / Z20 (MAX.) Z– 55˚C / Z+20˚C
3
3
3
3
3
Endurance
Shelf Life
Marking
Radial Lead Type
Sleeve (P.E.T.)
L^+1MAX
After 1000 hours' application of rated voltage at
105˚C, capacitors meet the characteristic
requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±20% of initial value
200% or less of initial specified value
Initial specified value or less
After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
φd
15^MIN
4^MIN
(mm)
φD 4 5 6.3 8
P 1.5 2.0 2.5 3.5
φd 0.45 0.45 0.45 0.5
Type numbering system (Example : 10V 33µF)
1 2 3 4 5 6 7 8 9 10 11
U S F 1 A 3 3 0 M DD
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
4~8
DD
Configuration
Capacitance tolerance (±20%)
Rated Capacitance (33 µF)
Rated voltage (10V)
Series name
Type
Dimensions
Cap.(µF)
6.8
10
15
22
33
47
68
100
150
220
V
6.3
10
Code
0J
1A
6R8
100
150
220
4 × 7 3.3 70
330
5 × 7 1.7 110
5 × 7 1.7 110
470
5 × 7 1.7 110 6.3 × 7 0.8 160
680 6.3 × 7 0.8 160 6.3 × 7 0.8 160
101 6.3 × 7 0.8 160
8 × 7 0.5 200
151
8 × 7 0.5 200
8 × 7 0.5 200
221
8 × 7 0.5 200
Frequency coefficient of rated ripple current
Frequency
50 Hz 120 Hz 300 Hz 1 kHz
Coefficient
0.35
0.50
0.64
0.83
10 kHz ~
1.00
16
25
35
1C
1E
1V
4 × 7 3.3 70
4 × 7 3.3 70
5 × 7 1.7 110
4 × 7 3.3 70
5 × 7 1.7 110 6.3 × 7 0.8 160
5 × 7 1.7 110
5 × 7 1.7 110 6.3 × 7 0.8 160
6.3 × 7 0.8 160 6.3 × 7 0.8 160
8 × 7 0.5 200
6.3 × 7 0.8 160
8 × 7 0.5 200
8 × 7 0.5 200
8 × 7 0.5 200
8 × 7 0.5 200
Case size Impe- Rated
φ D × L (mm) dance ripple
Max. Impedance (Ω) at 20˚C 100kHz
Rated Ripple (mArms) at 105˚C 100kHz
Please refer to page 21, 22, 23 about the formed or taped product spec.
Please refer to page 3 for the minimum order quantity.
CAT.8100V