URZ2D101MRD6 Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
RZ Compact & Low-Profile Sized, Wide Temperature Range
series
Very small case sizes same as RS series, but operating over wide
temperature range of –55 (–40) to +105˚C.
Compliant to the RoHS directive (2011/65/EU).
(Through 100V only)
RZ
Specifications
High
Te m p e r a t u re
RS
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Performance Characteristics
– 55 to +105˚C (6.3 to 100V) , – 40 to +105˚C (160 to 400V)
6.3 to 400V
0.1 to 10000µF
± 20% at 120Hz, 20˚C
Leakage Current
Rated voltage (V)
6.3 to 100
After 1 minute's application of rated voltage, leakage current
is not more than 0.03CV or 4 (µA), whichever is greater.
After 2 minutes' application of rated voltage, leakage current
is not more than 0.01CV or 3 (µA), whichever is greater.
160 to 400
After 1 minute's application of rated voltage,
I = 0.04CV+100 (µA) or less
Tangent of loss angle (tan δ)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz at 20˚C
Rated voltage (V) 6.3
10
16
25
35
50
63
100 160 200 250
tan δ (MAX.) 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.20 0.20
400
0.25
Measurement frequency : 120Hz
Rated voltage (V)
6.3 10 16 25 35 50 63 100 160 200 250 400
Stability at Low Temperature _{Impedance ratio Z– 25˚C / Z+20˚C 5}
4
3
2
2
2
2
2
3
3
3
6
ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C 10
8
6
4
3
3
3
3
4
4
6 10
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when
the capacitors are restored to 20°C after the rated
voltage is applied for 1000 hours at 105°C.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure
relief vent
(φ8up)
L^{+ MAX}
(φD < 20) 1.5
(φD 20) 2.0
15MIN
4MIN
(mm)
φD 5 6.3 8 10 12.5 16 18 20
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0
φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0
• Please refer to page 20 about the end seal configuration.
Type numbering system (Example : 10V 330µF)
1 2 3 4 5 6 7 8 9 10 11 12
URZ 1 A 3 3 1 MPD
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
5 · 6.3
DD
8 · 10
PD
12.5 to 18
HD
20
RD
Size code
Configuration
Capacitance tolerance (±20%)
Rated capacitance (330µF)
Rated voltage (10V)
Series name
Type
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100C