|
URS1H222MRD Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS | |||
|
ALUMINUM ELECTROLYTIC CAPACITORS
RS Compact & Low-profile Sized
series
Compact & low profile case size.
Compliant to the RoHS directive (2011/65/EU).
(Through 100V only)
RZ
High
Te m p e r a t u re
RS
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
â 40 to +85ËC
6.3 to 400V
0.1 to 10000µF
± 20% at 120Hz, 20ËC
Performance Characteristics
Leakage Current
Rated voltage (V)
6.3 to 100
After 1 minute's application of rated voltage, leakage current
is not more than 0.03CV or 4 (µA), whichever is greater.
After 2 minutes' application of rated voltage, leakage current
is not more than 0.01CV or 3 (µA), whichever is greater.
160 to 400
After 1 minute's application of rated voltage.
I = 0.04CV+100 (µA) or less
Tangent of loss angle (tan δ)
Stability at Low Temperature
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz at 20ËC
Rated voltage (V) 6.3
10
16
25
35
50
63
100 160 200 250
tan δ (MAX.) 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.20 0.20
400
0.25
Measurement frequency : 120Hz
Rated voltage (V)
6.3 10 16 25 35 50 63 100 160 200 250 400
Impedance ratio Zâ 25ËC / Z+20ËC 5
4
3
2
2
2
2
2
3
3
3
6
ZT / Z20 (MAX.) Zâ 40ËC / Z+20ËC 12 10
8
5
4
3
3
3
4
4
6 10
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when
the capacitors are restored to 20°C after the rated
voltage is applied for 2000 hours at 85°C.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 85ËC for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Type numbering system (Example : 10V 330µF)
Sleeve (P.E.T.)
Ïd
1 2 3 4 5 6 7 8 9 10 11 12
URS 1 A 3 3 1 MPD
Pressure
relief vent
(Ï8up)
L+ MAX
15MIN
4MIN
(mm)
ÏD 5 6.3 8 10 12.5 16 18 20
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0
Ïd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0
(ÏD 20) 1.5
(ÏD 20) 2.0
⢠Please refer to page 20 about the end seal configuration.
Configuration
ÏD
Pb-free leadwire
Pb-free PET sleeve
5 · 6.3
DD
8 · 10
PD
12.5 to 18
HD
20
RD
Size code
Configuration
Capacitance tolerance (±20%)
Rated capacitance (330µF)
Rated voltage (10V)
Series name
Type
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100C
|
▷ |