UPZ2D470MPD Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
PZ High Voltage, Smaller-sized
series
High ripple current.
Load life of 2000 hours at 105°C.
Suited for ballast applications.
Adapted to the RoHS directive (2002/95/EC).
PT
Smaller
PZ
Specifications
Item
Performance Characteristics
Category Temperature Range
– 25 ~ +105°C
Rated Voltage Range
200 ~ 450V
Rated Capacitance Range 18 ~ 470µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 1 minutes' application of rated voltage, leakage current is not more than 0.04CV+100 (µA).
tan δ
Rated voltage (V)
tan δ (MAX.)
Measurement frequency : 120Hz,
200
400
420
0.12
0.15
0.20
Temperature : 20°C
450
0.20
Stability at Low Temperature
Rated voltage (V)
200
Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C
3
Measurement frequency : 120Hz
400
420
450
8
8
8
Endurance
After an application of D.C. bias voltage plus the rated ripple
current for 2000 hours at 105°C the peak voltage shall not
exceed the rated D.C. voltage, capacitors meet the
characteristic requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ± 20% of initial value
200% or less of initial specified value
Initial specified value or less
Shelf Life
Marking
After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Bd
Sleeve (P.E.T.)
Prerleiesfsvuerent ^L+2.0MAX.
15^MIN
4^MIN
(mm)
BD 10 12.5 16 18
P 5.0 5.0 7.5 7.5
Bd 0.6 0.8 0.8 0.8
• Please refer to page 21 about the end seal configulation.
Type numbering system (Example : 200V 220µF)
U¹ P² Z³ 2⁴ D⁵ 2⁶ 2⁷ 1⁸ M^{9 1}H⁰ D¹¹ T¹²
Configuration
B D ^{PPbb--ffrreeee lPeEaTdwsilreeeve}
10
PD
12.5 ~ 18
HD
Size code
Configuration
Capacitance tolerance (±20%)
Rated Capacitance (220µF)
Rated voltage (200V)
Series name
Type
Please refer to page 21, 22, 23 about the formed or taped product spec.
Please refer to page 3 for the minimum order quantity.
Dimension table in next page.
CAT.8100V