|
UPV1H470MGD Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS | |||
|
ALUMINUM ELECTROLYTIC CAPACITORS
PV Miniature Sized, Low Impedance, High Reliability
series
Miniature sized low impedance series withstanding 5000 hours load life at +105°C.
Compliant to the RoHS directive (2011/65/EU).
PJ Long Life
PV
Specifications
Item
Performance Characteristics
Category Temperature Range
â 55 to +105°C
Rated Voltage Range
6.3 to 50V
Rated Capacitance Range 0.47 to 390µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
Tangent of loss angle (tan δ)
After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater.
Measurement frequency : 120Hz at 20°C
Rated voltage (V)
tan δ (MAX.)
6.3
0.22
10
0.19
16
0.16
25
0.14
35
0.12
50
0.10
Measurement frequency : 120Hz
Stability at Low Temperature
Rated voltage (V)
6.3
10
16
25
35
50
Impedance ratio ZT / Z20 (MAX.) Zâ 55°C / Z+20°C
5
5
4
3
3
2
Endurance
The specifications listed at right shall be met when
the capacitors are restored to 20°C after the rated
voltage is applied for 5000 hours at 105°C.
Capacitance change
tan δ
Leakage current
Within ± 30% of the initial capacitance value
300% or less than the initial specified value
Less than or equal to the initial specified value
Shelf Life
Marking
After storing the capacitors under no load at
105ËC for 1000 hours and then performing voltage
treatment based on JIS C 5101-4 clause 4.1 at
20°C, they shall meet the specified values for the
endurance characteristics listed at right.
Printed with white color letter on dark brown sleeve.
Capacitance change
tan δ
Leakage current
Within ± 20% of the initial capacitance value
150% or less than the initial specified value
Less than or equal to the initial specified value
Radial Lead Type
Sleeve (P.E.T.)
Ïd
Pressure
relief vent
(Ï6.3up )
L+1.5 MAX.
15MIN
4MIN
(mm)
ÏD 5 6.3 8
P 2.0 2.5 3.5
Ïd 0.5 0.5 0.6
Type numbering system (Example : 25V 47µF)
1 2 3 4 5 6 7 8 9 10 11
UP V 1 E 4 7 0 MGD
Configuration
ÏD
Pb-free leadwire
Pb-free PET sleeve
5
FD
6.3 · 8
GD
Configuration
Capacitance tolerance (±20%)
Rated capacitance (47µF)
Rated voltage (25V)
Series name
Type
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
⢠Frequency coefficient of
rated ripple current
(10kHz to 200kHz=1)
390
220
150
100
68
47
33
120Hz
22
300Hz
1kHz
15
10
0.68
0.47
0
0.5
0.6
0.7
0.8
0.9
1.0
Frequency coefficient
CAT.8100C
|
▷ |