|
UPT2G121MHD6 Datasheet, PDF (1/3 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS | |||
|
ALUMINUM ELECTROLYTIC CAPACITORS
PT Miniature Sized, High Ripple Current, Long Life
series
High ripple current.
Suited for ballast application.
Compliant to the RoHS directive (2011/65/EU).
CA Long Life
PT
Smaller
PZ
Specifications
Item
Performance Characteristics
Category Temperature Range
â 25 to +105°C
Rated Voltage Range
200 to 450V
Rated Capacitance Range 15 to 820µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA)
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
200
0.12
Measurement frequency : 120Hz at 20°C
220
250
400
420
450
0.12 0.12 0.15 0.20 0.20
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
Zâ 25°C / Z+20°C
Measurement frequency : 120Hz
200 220 250 400 420 450
3
3
3
8
8
8
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 5000 hours at 105°C, the peak
voltage shall not exceed the rated voltage.
Capacitance change
tan δ
Leakage current
Within ± 20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 105ËC for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
Ïd
Pressure
relief vent
L + MAX.
15 MIN
4 MIN
(mm)
ÏD 10 12.5 16 18 20 22 25
P 5.0 5.0 7.5 7.5 10.0 10.0 12.5
Ïd 0.6 0.6 0.8 0.8 1.0 1.0 1.0
0.5 0.5 0.5 0.5 0.5 1.0 1.0
In case L > 25 for the Ï12.5 dia. unit, lead dia. Ï d = 0.8mm.
(ÏD < 20) : 1 .5
(ÏD 20) : 2 .0
⢠Please refer to page 20 about the end seal configuration.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
Type numbering system (Example : 250V 220µF)
1 2 3 4 5 6 7 8 9 10 11 12
U PT 2 E 2 2 1 M HD T
Size code
Configuration
Capacitance tolerance (± 20%)
Rated capacitance (220µF)
Rated voltage (250V)
Series name
Type
Configuration
ÏD
Pb-free leadwire
Pb-free PET sleeve
10
PD
12.5 to 18
HD
20 to 25
RD
CAT.8100C
|
▷ |