UPM0J471MPD Datasheet, PDF (1/7 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
PM Extremely Low Impedance, High Reliability
series
High reliability withstanding 5000 hour load life at +105°C (3000/2000 hours
for smaller case sizes as specified below).
Capacitance ranges available based on the numerical values in E12 series
under JIS.
Adapted to the RoHS directive (2002/95/EC).
Specifications
(through 100V only)
PM
Smaller
PW
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
tan δ
Performance Characteristics
– 55 ~ +105°C (6.3 ~ 100V), –40 ~ +105°C (160 ~ 400V), –25 ~ +105°C (450V)
6.3 ~ 450V
0.47 ~ 15000µF
± 20% at 120Hz, 20°C
Rated Voltage (V)
Leakage current
6.3 ~ 100
160 ~ 450
After 1 minute's application of rated voltage, leakage current is not more CV ^<= 1000 : _I = 0.1CV+40 (µA) max. (1 minute's)
than 0.03CV or 4 (µA), whichever is greater.
CV > 1000 : I = 0.04CV+100 (µA) max. (1 minute's)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz, Temperature : 20°C
Rated Voltage (V)
tan δ (MAX.)
6.3
0.22
10
0.19
16
0.16
25
0.14
35
0.12
50
0.10
63 ~ 100 160 ~ 350 400 · 450
0.08
0.20
0.25
Rated voltage (V)
6.3 · 10 16 25 · 35 50~100 160~200 250 315~350 400
Stability at Low Temperature Impedance
Z– 25°C / Z+20°C
—
—
—
—
—
—
—
—
ratio (MAX.)
Z– 40°C / Z+20°C
—
—
—
—
4
6
8
10
Z– 55°C / Z+20°C
4
3
3
2
—
—
—
—
450 120Hz
15
—
—
Endurance
Shelf Life
Marking
Radial Lead Type
Sleeve (P.E.T.)
After an application of D.C. bias voltage plus the rated ripple
current for 5000 hours (2000 hours for D = 5 and 6.3,
3000 hours for D=8) at 105°C the peak voltage shall not
exceed the rated D.C. voltage, capacitors meet the
characteristic requirements listed at right.
After storing the capacitors under no load at 105°C
for 1000 hours, and after performing voltage treatment based
on JIS C 5101-4 clause 4.1 at 20°C, they will meet the
characteristic requirements listed at right.
Printed with white color letter on dark brown sleeve.
Capacitance change
tan δ
Leakage current
Capacitance change
tan δ
Leakage current
Within ±20% of initial value
200% or less of initial specified value
Initial specified value or less
Within ±20% of initial value
150% or less of initial specified value
Initial specified value or less
Type numbering system (Example : 25V 470µF)
1 2 3 4 5 6 7 8 9 10 11 12
UPM 1 E 4 7 1 MPD
φd
Configuration
Capacitance tolerance (± 20%)
Rated Capacitance (470µF)
Type
Small Dia
Low Profile
Size code
Code
6
Rated voltage (25V)
Series name
Pressure
relief vent
(φ6.3up)
L^{+ MAX.}
15^MIN
4^MIN
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
Type
(φD < 10) 1.5
(φD ^>= 10) 2.0
5
DD
6.3
ED
8 · 10
PD
(mm)
12.5 ~ 18
HD
φD 5 6.3 8 10 12.5 16 18
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm.
Frequency coefficient of Rated voltage
rated ripple current
Rated voltage
• Please refer to page 21 about the end seal configulation.
15000
10000
15000
6800
10000
4700
680₃0₃₀₀
470₂0₂₀₀
Frequency coefficient
Frequency coefficient
33010500
22010000
1500⁶⁸⁰
6.3~100V
(10kHz~
200kHz=1)
6.3~100V
(10kHz~
200kHz=1)
1000⁴⁷⁰
680³³⁰
220
470
150
330
100
220 ₆₈
150 ₄₇
100 33
68 22
120Hz
300Hz
1kHz
47 ¹⁵
Please refer to page 21, 22, 23 about the formed or taped product spec.
Please refer to page 3 for the minimum order quantity.
Dimension table in next page.
160~450V
33 ¹⁰
22^0.68
120Hz
300Hz
1kHz
0.47
15
0
10
0.5 0.6 0.7 0.8 0.9 1.0
Frequency coefficient
0.68
50Hz
0.47
0.80
0
120Hz
100Hz
11kHz 110kHz~
1.00
1.25
1.40
1.60
0.5 0.6 0.7 0.8 0.9 1.0
CAT.8100V-1 ^{Frequency coefficient}