UPA0J471MPD Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
PA Miniature Sized, Low lmpedance,
High Reliability For Switching Power Supplies
series
Lower impedance than PW series.
Smaller case size and high ripple current.
Adapted to the RoHS directive (2002/95/EC).
PA
Low
Impedance
PW
Specifications
ltem
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
tan δ
Stability at Low Temperature
Performance Characteristics
– 55 ~ +105˚C
6.3 ~ 35V
180 ~ 10000µF
± 20% at 120Hz, 20˚C
After 1 minutes' application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater.
Rated voltage (V)
6.3
10
16
25
35
120Hz 20˚C
tan δ (MAX.)
0.22
0.19
0.16
0.14
0.12
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V)
6.3
10
16
25
35
120Hz
Impedance ratio ZT / Z20 (MAX.) Z–55˚C / Z+20˚C
3
3
3
3
3
Endurance
Shelf Life
Marking
After an application of D.C. bias voltage plus the rated ripple current for 5000 hours ( 3000 hours for D = 8, 4000 hours
for D = 10) at 105˚C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic
requirements listed below.
Capacitance change
Within ± 20% of initial value (6.3V, 10V : ± 30%)
tan δ
200% or less of initial specified value (6.3V, 10V : 300%)
Leakage current
lnitial specified value or less
After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Type numbering system (Example : 10V 470µF)
Sleeve (P.E.T.)
d
L^{+ MAX.}
15 ^MIN
4 ^MIN
B^P6^re.3^su^sup^{re relief vent}
(L < 20) 1.5
(L 20) 2.0
(mm)
BD 8 10 12.5 16 18
P 3.5 5.0 5.0 7.5 7.5
Bd _{0.6 0.6 0.6 0.8 0.8}
0.5 0.5 0.5 0.5 0.5
: In case L > 25 for the B12.5 dia. unit, lead dia. B d = 0.8mm.
• Please refer to page 21 about the end seal configulation.
U¹ P² A³ 1⁴ A⁵ 4⁶ 7⁷ 1⁸ M⁹ P¹⁰ D¹¹
Configuration
BD
8
12.5
1_~018
PPbb--ffrreeee _PlPeE_DaTdwsilreeeve
HD
Size code
Capacitance tolerance (±20%)
Rated Capacitance (470µF)
Rated voltage (10V)
Series name
Type
Frequency coefficient of rated ripple current
Cap. (µF)
Frequency _50Hz
120Hz 300Hz
1kHz
180 ~ 330
0.55
0.65
0.75
0.85
390 ~ 1000
0.70
0.75
0.80
0.90
1200 ~ 10000
0.80
0.85
0.90
0.95
10kHz~
1.00
1.00
1.00
Please refer to page 20, 21 about the formed or taped product spec.
Please refer to page 3 for the minimum order quantity.
Dimension table in next page.
CAT.8100V